racing more then two microsizers????

1coolskyline · #1 09-08-2002, 01:09 PM

this may be a stupid question but how do you race more then two of the microsizers? I mean they are 49mhz and 27mhz are their different freqs? Let me know peace.

E)(pul$ioN · #2 09-08-2002, 01:11 PM

Whenever you have two cars that are different freqs. That calls for a two car race fo shure if you know what I mean. If not, just holla again.

1coolskyline · #3 09-08-2002, 01:14 PM

no what i am asking is there a way to change your car freq so you can get a for or five car race cranking? Someone that knows give me a holla.

E)(pul$ioN · #4 09-08-2002, 01:20 PM

Oh I see now brotha. I doubt you can do it, but y not just take off the curcuit board and put in one with another different frequency (Meaning a Bit Char-g curcuit board cuz MicroSizers only got two diff. freqs.). I believe that the difference between a 45 MHZ and a 35 MHZ is in the curcuit board. I believe that it can be done, but I doubt you will be able to.

retroicon · #5 09-09-2002, 01:37 AM

You don't race more than 2 microsizers.... there are only two frequencies.... If you want to race more cars you need more frequencies... and you get more frequencies by buying Japanese or Australian models...

There are 6 total frequencies for the TOMY produced Bit/Micro Line...

check out this thread... it should explain it..

http://tinyrc.com/forums/showthread.php?s=&threadid=899

Icon

Namuna · #6 09-09-2002, 09:15 AM

Quote:

Originally posted by 1coolskyline
this may be a stupid question but how do you race more then two of the microsizers?

The direct answer to that question is; You don't.

In order for Hobbico to LEGALLY sell the MicroSizers in the US, they had to restrict their frequencies to ONLY 27MHz and 49MHz, anything else (in the US) is considered, by the FCC, as NOT LEGAL.

So, if you want to have more than 2 cars racing...You've got to get yourself a, FCC-frowned-upon, Japanese or Australian version (as retroicon said).

baleisen · #7 09-09-2002, 07:09 PM

Do what I did. Buy a few IR receiver decks. They are the #$%^. I love the deluxe IR X-mitter with my Bit Char-Q! BAE

Redfire · #8 09-09-2002, 09:17 PM

Are you talking about the Infra-Red receiver?

baleisen · #9 09-09-2002, 10:24 PM

Yes. $20.00. I am adding springs,NimH cell, ?? I race it all over the kitchen. My cat goes nuts. I just want some nice bodies. These look too much like tennis shoes. Not as bad as Digis but bad enough. BAE

Bootylactin · #10 09-10-2002, 01:08 AM

Where do you get these IR transmitters, and how hard is it to modify the bit to use it?

I'm definitely interested, as my Loctite Skyline has horrible reception, and no cripple cap to remove (on the front or back).

We've also had issues with interference, EVEN between the 27 and 57 models.

Thanks,

Jon

payaso · #11 09-10-2002, 03:03 AM

http://tinyrc.com/forums/showthread.php?s=&threadid=881

Look here...

silla