01-03-2003, 11:18 AM
|
|
TinyRC Pro
|
|
Join Date: Dec 2002
Location: NYC
Posts: 23
|
|
|
Wild Char-g owners becareful
not sure what i did, but it seems the rear wheels(rubber ones) aren't grabbing the hubs, so the Wild G's not moving. The gears are good, and everything is turning as they should, but the wheels are not gripping. Almost like the inside of the wheels expanded or something. This happen to anyone else? Time for another check-up 
__________________
______________________________
Automodelista: 3.8, 150mah, spring sus.
Wild-G: Raise Tiger w/3.8@the wheels & 2.2@the plow, 150mah
Lancer EVO: 3.0, 150mah, drift set
Hummer shell: 3.8, 150mah, spring sus.
|
01-03-2003, 11:23 AM
|
|
|
|
|
01-03-2003, 12:08 PM
|
 |
Sith Bit Racer
|
|
Join Date: Nov 2002
Location: Buffalo, NY USA
Posts: 212
|
|
|
They snap on and off, so make sure they are snapped on fully.
|
01-03-2003, 01:47 PM
|
|
|
|
|
01-24-2003, 04:49 PM
|
|
TinyRC Pro
|
|
Join Date: Dec 2002
Location: NYC
Posts: 23
|
|
|
FIXED!
i pushed 2 of the 4 holding tabs in the wheel downward a little, to the point where it looked like they were about to break. Then i applied super glue at the base of the 2 tabs to secure them to the wheel. Let it dry, then...snap! they grab on tight as new!
worse comes to worse, if the tabs break off - Then i would have glued the wheels to the hub.
__________________
______________________________
Automodelista: 3.8, 150mah, spring sus.
Wild-G: Raise Tiger w/3.8@the wheels & 2.2@the plow, 150mah
Lancer EVO: 3.0, 150mah, drift set
Hummer shell: 3.8, 150mah, spring sus.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 09:49 PM.
|
|
- Calsonic
Linear Mode
