Digi Q control conversion for BIT CharG

slotsurfer · #1 04-27-2002, 11:24 PM

A company called Tap Spring co. Makes a IR conversion kit for the bit charG so you can use the Digi Q controller and have better speed control. cost $19.95 plus $12.95 shipping EMS or $3.00 snail mail.Check out the site I learned a lot just from the step by step conversion with photos. Of what makes are BIT tick.Tap springs

slotsurfer · #2 04-27-2002, 11:39 PM

Photo of IR conversion

Wedginator · #3 04-28-2002, 10:13 AM

That's pretty neat.... i have one question... is the digi q car have digital proportional steering and throttle?

slotsurfer · #4 04-28-2002, 05:59 PM

With the conversion you would only have proportional throttle on the BIT charG.The Digi Q uses tank type sterring it has to motors one for each rear wheel.

323iT · #5 04-28-2002, 06:51 PM

Quote:

Originally posted by Wedginator
That's pretty neat.... i have one question... is the digi q car have digital proportional steering and throttle?

yes
the digi q car process the amount of throttle and steering and then control the speed of each motor to make it accelerate/turn

Wedginator · #6 04-28-2002, 07:47 PM

thanks!!
that's pretty cool.. i think i'll get one..

tinyrc · #7 04-28-2002, 08:02 PM

Cool, let us know how the install goes!

PorscheGuy964 · #8 05-02-2002, 05:11 PM

That seems cool from a tinkering stand point but from my point of veiw YOUR KILLING THE BITS SOUL!!!!!! lol but seriously that seems like alot of trouble to switch to something that can be blocked by a vase.....

Harry · #9 05-20-2002, 04:50 AM

Hi,

This is Harry who made this BC"Q" board for BitChar-G.

Basically, it is a DIY product for whom like to build up a different BitChar-"Q", which have following benefits:

1. NO Antenna
2. Speed control by the Digi-Q's R/C ( propotional speed)
3. Longer running time ( due to PWM speed control)
4. Additional flash light ckt on board (police car, safety car in F1)
5. F.W. L/R turn, more reallistic than Digi-Q

It is really whole new feeling about TinyRC car!

regards
harry @ TapSpring.com

Harry · #10 05-22-2002, 11:56 PM

Oh! by the way,

If you do not have Digi-Q's R/C, but own a Palm PDA device, there is a freeware can simulate Digi-Q's RC on Palm.
http://pro.tok2.com/~hirock/Palmware...til/index.html

regards
harry

LanternRouge · #11 05-23-2002, 11:57 AM

Harry,

I lack soldering skills and don't have a soldering iron. Is there a way I could purchase a conversion from you?

Harry · #12 05-23-2002, 09:55 PM

Hi, LanternRouge

Yes, you can send your cars to us. We will modify it for you.

the steps,
1. Goto our Kagi order page http://order.kagi.com/cgi-bin/r1.cgi?2NF&& and place an order with n*19.95US + 1*12US(shipping), where n is the cars you needed to be modified. and leave a message on [comments for the supplier] field, say " Car modification needed". and then summit the order.

2. Mail you cars to us, the address here http://www.tapspring.com/TAPSPRING.htm

2. When we receive your order, we will wait for your cars mail in.
and modify your cars in 1 day, and send it back to you ASAP.

regards
harry