11-09-2002, 04:23 PM
|
|
Registered User
|
|
Join Date: Oct 2002
Posts: 125
|
|
|
A cost & material question came up on a different forum, so I thought I would post the answer here to.
Well the material list is easy, the cost is a little harder to figure.
Materials:
4'x8" mdf
060 polystyrene
1/2" angle alum.
1/4" wooden dowels
2"x2"x24" pine
1/2" wooden dowel
Latex paint - green, dk green,lt gray, med. gray, dk gray, black, white, yellow
Red spray paint
spackle
access to sign making equipment
and permanent place to put it.
Now for cost. Well I already had the paint and the polystyrene, the mdf was 12.00 for a 4'x8', the dowels were about 4.00, angled alum was 4.00 for 8'. I have my own sign making equipment so no expense there.
So I spent about $20.00
so if you started from scratch and inkjeted your sponsor signs I say you could do all for under $50.00
tip: When you buy the paint, check the oops paint, all my paint is left over from a winnie the pooh mural on my daughters wall, I got about 6 or 7 different colors for under $10.00.
|
11-09-2002, 06:40 PM
|
|
Registered User
|
|
Join Date: Oct 2002
Posts: 125
|
|
|
Here is the track with the barriers removed and the inside lanes blocked.
And no I dont live in cali any more, sorry....
|
11-11-2002, 01:07 AM
|
|
TinyRC Pro
|
|
Join Date: Oct 2002
Posts: 43
|
|
|
how wide aar your lanes? i have a track but my lanes are too narrow to drive.
__________________
1999 ford cobra mustang
red moter
red transefer gear
red rear axle
no reverse mod
1995 Mitsubishi Eclips GSX Turbo
NOS motor
red/red grearing
no mods.
|
11-11-2002, 09:10 AM
|
|
Registered User
|
|
Join Date: Oct 2002
Posts: 125
|
|
|
Lanes are 8.5 inches wide
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 10:41 PM.
|
|
Linear Mode
