Command Logic Lights MODS

drewdown84 · #1 01-06-2007, 01:27 PM

Ok so I was browsing ebay for ideas and maybe cheap extra parts... when i found something interesting... Command Logic Lights that were modded with fog lights... i knew i could do this myself... just had to figure it out... so... i bought the extra LED's... and i got everything soldered up... except to the CLL kit... when i connected the extra LED to the head light circuit, the fog lamp lit up... but the head lights died out... soooo... i figured why not check it out on the break circuit... i connected them to the brake circuit and low and behold... it lit up... and didnt kill the brake lamps...

so heres my question to anyone that has modded their CLL kit with extra set of LEDs on the headlamp circuit... what am i doing wrong? anyone know how to successfuly add them to your headlamp circuit?

drewdown84 · #2 01-10-2007, 02:38 PM

just in case anyone wanted to know the answer to my problem...

white LEDs and orange LEDs have different properties, so they cannot be put in the same circuit... However red LEDs and orange LEDs have similar properties and can be in the same circuit...

...when i gained that information i finished my mod... here it is... does it look good or does it look good?

EvilSage · #3 07-02-2007, 03:57 AM

ahh nicely done, You basically have to find the right LED's most have different stats, the blue ones I found had the same as the headlight ones

arch2b · #4 07-02-2007, 06:40 PM

differing color leds typically have differing voltage requirements. you can find lots of info on sites like http://www.eled.com/default.asp, http://www.lsdiodes.com/shop/index.php?main_page=page_4,

dkblackhawk · #5 07-30-2007, 01:33 PM

thanks for the site man...i was wondering why some lights were going out and some werent