TinyRC.com

TinyRC.com (http://tinyrc.com/forums/index.php)
-   ZipZaps SE (http://tinyrc.com/forums/forumdisplay.php?f=121)
-   -   warning!!!! please read (http://tinyrc.com/forums/showthread.php?t=13933)

ridealot100 10-21-2003 07:07 AM

warning!!!! please read
 
qll ytou kids with dremels and roary tools were glasses when you are using them. it can cause you to be blind. today this morning i was dremeliing and a piece shot off into my eye. it hurt like you wouldnt beliee so i ask you please were eye protection when you are usinmg a dremel or any other power tool.

Murcielago659 10-21-2003 12:05 PM

Are you ok aside from the pain? Yes, I always wear eye protection.

viperkilla 10-21-2003 01:53 PM

Ouch that must hurt! >.< I dont have a dremel yet. I just use a heated x-acto knife. Plus I dont trust myself with a dremel. I am only 14.

metsrule119 10-21-2003 02:52 PM

I'm 14 too. I use my dads dremmel and its not very hard to use

ridealot100 10-21-2003 03:48 PM

im 14 to(fremels are relatively easy to use you just gotta be careful. my eye id oin better except i couldnt open my i for a while but it got better and i have learned my lesson so it wasnt all bad

aperson 10-23-2003 05:29 PM

i use a dremel just not for these things. im 14 like most of you too unless you got one of teh $60 ones with all of the speeds and the extension thingy you shouldn't try to use them with these things.

ridealot100 10-23-2003 06:38 PM

yeah thats the kiunda dremel i use

slugbugg 10-23-2003 08:52 PM

ridealot100,glad to hear you'll be alright.

I almost hate to use a dremel cutting disc just because of the chance of a disk blowing apart.

I think I got my scare at my old job while using a 1/4 air die grinder (about 20,000rpm's)to cut a piece a aluminum sheet and the 3" disc shattered, pieces were everywhere.I was very glad I had the sense not to be in line with the disc edge because if a piece of that had hit me I'd have off to the clinic for stitches.I had safety glasses on and gloves but we never did find all the pieces of the disc some of it was probally stuck in the ceiling.

safety glasses/safety shields are very good things to use.

ridealot100 10-24-2003 05:59 PM

WOW i am never using a disc again. uless it is wvon with that one nylon or carbon stuff(shatter proof)

slugbugg 10-24-2003 10:30 PM

Good idea but remember that even the reinforced disc's can still shatter, thats what was on the air die grinder that blew apart on me.



As I have gotten older I really go out of my way to get the saftey gear I need.

Trying to look through dirty/scratched saftey glasses is still easier than looking through a glass eye.Think about it.
(I dont want a glass eye because of a moment of stupidity)

SlowbutCourious 10-27-2003 01:38 PM

Re: warning!!!! please read
 
Quote:

Originally posted by ridealot100
qll ytou kids with dremels and roary tools were glasses when you are using them. it can cause you to be blind. today this morning i was dremeliing and a piece shot off into my eye. it hurt like you wouldnt beliee so i ask you please were eye protection when you are usinmg a dremel or any other power tool.
...I think it did more damage than u know...your hittin the WRONG keys...Eie kent evun wredea ti....:p ...slow down man...

Comrade_Boris 10-27-2003 09:15 PM

im 14 too.....i use x-actoknifes but i still gashed my finger to the bone last week while lowering my bB(look in bit char-g gallery) ill take a pic and post it.......of my finger.....................

Comrade_Boris 10-27-2003 09:17 PM

and i have glasses (perscription) with special safety glass for protection purpose...........sorry about your eye though.................

Comrade_Boris 10-27-2003 09:20 PM

1 Attachment(s)
my finger and my lowered bB:

Comrade_Boris 10-27-2003 09:22 PM

1 Attachment(s)
sorry about the pic quality......but it still (as a scar) is 4mm deep


All times are GMT -5. The time now is 05:32 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.