Xmod Wheel Base & Width ?
 

Can some one list a few dimmension of the XMods?

* the WIDTH of the chassis outter flush of rims...
* Wheel base lengths? (center front axle to center rear axle)

I need to know how well if at all the bodies may or may not fit my 4WD Mini-Z Chassis... (comming soon, but likely too late now that the xmods are 4wd). I want to make these bodies fit my chassis design as well as the Racer and Overland bodies... even if it needs a kit to fit the rear body posts.

Wheelbase is 3 11/16" long, center to center. Width is 2 5/8" from outer rim to outer rim. I'll try to get a pic up tomorrow showing the underside of the stock body, showing the two mounts. There's a slot-mount in the front (the chassis has a tab that slides into the front first, then has a catch-style hook in the back that it comes down and hooks with in the back.) hard to describe in words. hope it helps!

does anyone know the diameter of the rims? and or width! curious about fittin some miniz tires to that thing

if no one beats me to it, I'll measure tonite. (and I'll try to get that mounting pic too)

So its the same as a Mini-Z (MR01) in the LONG setting ;) well that solves the wheel base problem... the body will fit... but how does the side/front mount? I should be able to adapt them easily... to my AWD chassis...

now i know that there are 3 different wheelbases, what is the size of the longest one (the skyline i am assuming)

3-3/4"

the front mounts the same, you will just have to add the pieces on the sides of the body to fit a z, not sure how the overland bodies are though.