It's been said before that there are never any new ideas, everything new is just a rehash of something old. That's not always true but for the new racing "season" I'm doing it, using one Kyosho Oil Shock as a single side damper (SSD) on the MR03. The idea has been around a long time -- they've faded in and out of fashion in 1/12 pan cars, the InZane (now Lajf) P28 carries one, and to be fair, we at Greyscale have been playing with SSD's for a long time already. It just never occurred to...

color0

I realize I haven't said much about the F1 I own, and it's mainly because this car just takes a lot of work to get it running... mostly electrical gremlins occurring in heavily populated areas.

As far as the Worlds' go, F1 Pro was just pure frustration -- my car was definitely the fastest in the field and proved it with the fastest lap in qualifying and IIRC, the fastest F1 lap of the weekend. But the GLITCH! kept coming back again and again and in the end it just wouldn't hold together...

color0

Hokeydokey, so a long time ago (...a few weeks) I went to the PNWC 2012 race held at Inside Line Racing/Vallco Mall in Cupertino, CA. Unfortunately, I was sick, and my driving was pretty shot, so I knew I had no chance of winning, and instead I tested out a lot of different setups, got a lot of data on different bodies and diffs, and eventually settled on a 599XX with a ball diff and a LOT of holes. While I'm still not happy with how my setup performed at the Worlds', a couple people have asked...

color0

Hey everyone,

Sorry it took me so long to get this article out, but it is here finally.

The PN Racing 4D Trigger is a pretty clever bit, essentially it puts all the contact surfaces (forward/reverse) of the trigger on relocatable pivots so you can very carefully control how the trigger feels in your index finger. This allows you to have a true no-play, no-lag trigger, and you can have full confidence in modulating the brake and throttle input as this trigger (when...

color0

I started painting yesterday. The inside of the channel was painted with a flat black to keep a dull finish. I paint the exterior with a satin black. The process starts off with light coats and each builds on that.






...

arch2b