|
Differential Fun - Quick Change between RWD/AWD in the paddocks!
Well, I bought the AWD kit specifically for the rear ball differential. Kind of disgruntled with the fact that LSD did almost nothing for my steering/traction issue, I played with the differentials a bit. I remember people here saying you can loosen the screws and tighten them to change the ball diff's characteristics.
I found that you can loosen each of the 3 screws about a whole turn (maybe a little more, but definitely not 2 whole turns) and end up with freewheel spinning on the back end, ghetto FWD. That was okay, but not my style.
here's what I did.
I put the red gear diff on the back, and the red ball diff in front, exactly opposite what radio shack says to do. With the body shell off, you can get access to the differential screws one at a time, by rotating the wheels till you see a screw right near the front of the suspension. Get on it with a small screwdriver.
Make the differential really tight for a full AWD effect.
Loosen it up a lot for a more rear-biased drive with enough front wheel pull to keep the oversteer and spinouts in check
or
Loosen it further for almost pure RWD only. The fronts will still spin if you are off the ground, but with any pressure, the fronts stop and have no resistance.
|