
01-12-2003, 10:13 PM
|
 |
i am po
|
|
Join Date: Jan 2003
Location: canada, alberta
Posts: 552
|
|
|
If you wanted to paint you bit, you have to remove the original color? what will happen if you dont? will it not look as good?
thx
|

01-12-2003, 10:27 PM
|
 |
Mr. Goop
|
|
Join Date: Dec 2002
Location: sacramento
Posts: 760
|
|
|
just get some gray spray primer/paint and paint the primer on first... (after you remove the stickers). after its been primed you should be good to go with any type of paint job.
|

01-13-2003, 12:54 AM
|
 |
Mr. Goop
|
|
Join Date: Dec 2002
Location: sacramento
Posts: 760
|
|
|
painting on the inside really only loooks good if the body is the thin plastic/lexan like the bigger r/c bodys. the thicker plastic looks good with paint on the outside, just remember to put a few coats of clear over the final paint job and it will look great!
at least thats my opinion..
|

01-13-2003, 02:17 AM
|
 |
PLOOP!
|
|
Join Date: Jan 2003
Location: Trophy Club, TX
Posts: 177
|
|
|
has anyone actually painted with acryllics? just asking cause brushing this stuff on would be easier for me. i got mad brush skillz! heh heh
|

01-13-2003, 02:20 AM
|
 |
Told ya.
|
|
Join Date: Nov 2002
Location: NY, USA
Posts: 1,214
|
|
Quote:
Originally posted by krillin52
has anyone actually painted with acryllics? just asking cause brushing this stuff on would be easier for me. i got mad brush skillz! heh heh
|
Thin the acryllic first. I stink using a brush but if you gots mad skillz then by all means go ahead.
__________________
____________________
Meh.
|

01-13-2003, 10:21 AM
|
 |
Garage Rocker
|
|
Join Date: Jan 2003
Posts: 516
|
|
|
After you've clear coated with acrylic laquer, you can get the shine over the top by waiting at least a week for it to dry. Don't handle it during that time, as handling helps keep the paint soft. Wet sand it with some really fine grit sand paper, like 1500 or 2000 grit. Let the paper soak over night, so it's fully saturated, and flexible. Be really super careful around edges, and bumps sticking up. Avoid even hitting them with the sand paper if at all possible. I just folded the sandpaper into a small piece, and used the corner. Then went over it with some Rubbing Compound. I used some 3m stuff. Again be super careful around the edges, as rubbing compound is like a fine grade sandpaper. Then finish with a high grade polish/swirl remover, like Meguiers.
The dipping in Future might be an easier idea, but this is the way they do it on real cars, and I got really good results. If you paint a body with a brush, this is also how you level it out, and make it look more professional. If you really globbed the paint on, let it dry longer, like maybe even a month. Then use like 800 or a 1000 grit to level it out, and then proceed as above
Check out the pic in my sig of the Celica. The picture doesn't do it justice, because of the harsh lighting of the flash, but in natural lighting, it looks great.
Dave
Last edited by crazydave; 01-13-2003 at 10:30 AM.
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 04:28 PM.
|
|