TinyRC.com - XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q, Forums, News, Pictures, Parts, and Shop
Forums, XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
XMODS Hop-Ups, XMODS Parts, XMOD Hop-Ups, XMOD Parts, Bit Char-G Hop-Ups, Bit Char-G Parts, MicroSizers Hop-Ups, MicroSizers Parts

Go Back   TinyRC.com > 1/64 and Smaller > Bit Char-G, MicroSizers, Z-Cars, Clones > Bit Char-G Mods and Projects

Reply
 
Thread Tools Display Modes
  #16  
Old 02-01-2004, 08:05 PM
janniz janniz is offline
Registered User
 
Join Date: May 2003
Location: Hamburg
Posts: 7
Betty, your dirt-Bits are really looking great! Very good tutorials, too! How did you make these dish-type rims?

@strakka:
Yes, I found out myself now that it's kinda hard to find a Maru, even a used one. But at least I could test-drive one some days ago and now a want one for sure! The car was running excellent and the diff was also working good. The owner modified it a bit - he put some other grease into the diff and the car had new rims and soft tires. I loved to drive it!

I think I'll try to make my own ball-diff out of bit-parts now. The gears allready have holes, maybe you can just make those bigger and put little balls into them?? I'm not sure if it will work. I tried to use the diff of the 1/43 Epoch-Racer but it was to big. I'm building another propo-bit with 40-MHz-FM electronics and a carbon-chassis right now and this one should also have a diff, thats why I am (still) looking for the smallest diff available...
Reply With Quote
  #17  
Old 02-01-2004, 11:46 PM
betty.k betty.k is offline
Registered User
 
Join Date: Dec 2003
Location: australia
Posts: 12
janniz

thanks man! i'll be doing a tutorial on the wheels within the week, i'll keep you posted. basically i start with old school lego wheels and drill into the inside of the wheel with a large bit, sort of like countersinking. simple, but effective! i love the idea of the ball diff, pure genius! i'll have a go at it in the future, just looking for the right parts, let us know how you get on.
all my bits are now outdoor toys (except for the cat's!), there's just no turning back!
__________________
betty.k's dirty bits
http://geocities.com/bettyk3332003/

Last edited by betty.k; 02-01-2004 at 11:50 PM.
Reply With Quote
  #18  
Old 02-05-2004, 08:36 PM
frizzen frizzen is offline
Tool User
 
Join Date: Jan 2003
Location: Indy, IN, USA
Posts: 442
Send a message via AIM to frizzen Send a message via Yahoo to frizzen
betty.k,

Great site!! The S2000 looks way better modified as a monster truck than it ever did as a sports car. And you've given my partially melted chassis a new life!

Do they really need the shock, or would the T-plate be sufficent? And how can you upgrade to make a fluid filled shock?

Mine is gonna be an extended chassis (Panther clone), dual cell, Mosfets if I can find some, with an 1/8" phono-jack charge port, and maybe dual motors.

I'm trying to decide if this chassis wants to become a Monster Truck, a Stadium Truck, a Rally Car, or an On-Road car. I already have a home made Bit monster truck though, so I'm not sure..

How much does a body installed change the suspension movement? I mean, should you like rework a body to mount more like a Mini-Z?
__________________
Trying to quench our need for 1/70 scale speed!
-
Reply With Quote
  #19  
Old 02-07-2004, 12:06 AM
betty.k betty.k is offline
Registered User
 
Join Date: Dec 2003
Location: australia
Posts: 12
frizzen

thanks man!
when i started doing this mod i just used a stiffer "h plate" style design, with the flexibility of the plastic being the spring. so yeah you can get away with no shock. there's pics of my previous work here:

http://community.webshots.com/user/bettykphoto-date

have a look around, there's also pics of how i attach shells in the ultimate f.s. gallery. and you're right, the shell attaches on the front with the tab and on the sides with foam rubber, leaving the rear to move freely similar to a miniz.

gawd, oil damped shock?! sounds nice!! i find that friction provides enough damping on my bits, but hey. if i figure one out i'll let you know

let us know how you're dirty bit comes along!
__________________
betty.k's dirty bits
http://geocities.com/bettyk3332003/
Reply With Quote
  #20  
Old 02-10-2004, 04:06 AM
frizzen frizzen is offline
Tool User
 
Join Date: Jan 2003
Location: Indy, IN, USA
Posts: 442
Send a message via AIM to frizzen Send a message via Yahoo to frizzen
Great link.

Now I'm having routing issues inside the chassis. I'll get it eventually.

The more I play with it, dual motors wouldn't work for the way I'm doing the rear mounting of the back shock. As for Performance mods, if I could find Mosfets, I'd be set. Dual cells are the reason I'm having part of the trouble with routing stuff. I know that I can add capacitance to the board easily, so that should help with acceleration a bit.

Oh well, atleast I can be pretty sure I'll have the most trick Bit Char-G in the state. Now if I could only find a body to fit my monstrosity...
__________________
Trying to quench our need for 1/70 scale speed!
-
Reply With Quote
  #21  
Old 02-10-2004, 03:25 PM
mitchell's Avatar
mitchell mitchell is offline
Registered User
 
Join Date: Jun 2003
Location: St.john's ,Newfoundland, Canada
Posts: 97
try wraping tin foil around the 2 motors the salder a wire across the to or with zip zap motors just jam it under the cunductor
__________________
LEIK whys you maek fnu o my speelin?
Reply With Quote
  #22  
Old 02-10-2004, 08:29 PM
betty.k betty.k is offline
Registered User
 
Join Date: Dec 2003
Location: australia
Posts: 12
i've got a micro amps fet modded pcb in my s2000 monster. it's a dual cell, 7.1:1 gears, perfection 3.5 and larger diameter wheels. it flies, can climb up 40 degree inclines and can pop wheelies. so i think fets eliminate the need for a second motor, but to each his own.
__________________
betty.k's dirty bits
http://geocities.com/bettyk3332003/
Reply With Quote
  #23  
Old 02-11-2004, 02:06 AM
frizzen frizzen is offline
Tool User
 
Join Date: Jan 2003
Location: Indy, IN, USA
Posts: 442
Send a message via AIM to frizzen Send a message via Yahoo to frizzen
That's probably true, but which is more fun "High Speed" or "Excessive High Speed"?

In reality, probably no Fets. I'm thinking about Dual-motoring the car just to make it that much more exotic.

Then I think I'm going to have a reverse lock-out switch, and an on/off switch (cut down DIP) installed.
__________________
Trying to quench our need for 1/70 scale speed!
-
Reply With Quote
  #24  
Old 02-11-2004, 07:29 AM
betty.k betty.k is offline
Registered User
 
Join Date: Dec 2003
Location: australia
Posts: 12
aah, you're asking the wrong guy, i'd answer high speed. i'm happy with the 10kph i get out of my offroaders. any faster and they don't steer well and ithey can't do technical sections. my first consideration is torque and 1 set of fets will drive a motor much harder than 2 motors on a stock pcb ever could. a switch is a good idea when running nimh's, i've got switches on my bits. oh, what's a reverse lockout switch? confused:
__________________
betty.k's dirty bits
http://geocities.com/bettyk3332003/
Reply With Quote
  #25  
Old 02-12-2004, 04:36 AM
frizzen frizzen is offline
Tool User
 
Join Date: Jan 2003
Location: Indy, IN, USA
Posts: 442
Send a message via AIM to frizzen Send a message via Yahoo to frizzen
Back when these had just more reccently come out, somebody realized that if you rearrange some wires, you can get more power to the motor from the basic setup.

Clip the reverse wire from the PCB, reattach reverse wire to (+ I think) terminal of battery.

A reverse lockout switch is a DTDP (or was it 2T3P) switch connected to the reverse lead and the battery terminal I mentioned. It lets you toggle between "stock board", or "reverse only". I'm not sure how this mod affects speed in relation to the other mods. Never tried them.
__________________
Trying to quench our need for 1/70 scale speed!
-
Reply With Quote
  #26  
Old 02-12-2004, 08:14 AM
Jtskty Jtskty is offline
Master Debater
 
Join Date: Oct 2002
Location: Earth
Posts: 312
Send a message via AIM to Jtskty
Bettyk your site is awesome. You got skills dude. You inspired me to make my own micro truck. I have most of my parts. I am going to use lego wheels like the rug runner mod. I plan to cut the tire and rim in half though because I don't think I would like the look Of them if they are that wide. In your tutorials, the lego tires you say to use are much smaller in height than the ones I am using. How do you get any ground clearance with them? Also, Do you use regular bit springs for the front?
Reply With Quote
  #27  
Old 02-12-2004, 04:00 PM
betty.k betty.k is offline
Registered User
 
Join Date: Dec 2003
Location: australia
Posts: 12
i get about 4 - 5mm of clearance by lowering the rear end and full size wheels up front makes a big difference too. i use those on some of my cars but my monster has hot wheels tunerz wheels onit, they're a good size for a monster, just need to make pen grip tyres for them. i buy custom springs from ph2t for all my bits, they're perfect for the front and rear.

and get a pcb fetted by micro amps, you won't be sorry!
__________________
betty.k's dirty bits
http://geocities.com/bettyk3332003/
Reply With Quote
  #28  
Old 02-16-2004, 06:31 PM
Racer9's Avatar
Racer9 Racer9 is offline
Tiny RC Pro
 
Join Date: Dec 2002
Location: Royersford,PA USA
Posts: 1,212
Please build this car!

Oh yeah try to build it off a ZZ SE once you are done. Make sure to get both FET modded by microamps.
__________________
Reply With Quote
  #29  
Old 04-07-2004, 09:45 AM
vinnyg vinnyg is offline
Registered User
 
Join Date: Apr 2003
Posts: 22
Send a message via AIM to vinnyg
sorry guys, i've been caught up in school and also bit planes as well. to make this this nice i wanted to have the same size wheels and tires on the front and back. the only way for me to do that is if i use a zipzap. but the zipzap internals(especially se) are really big. when i made my pan chassis it was hard to fit everything if i am going to use independent suspension. i think that if i found a good source of off road micro tires, i would be motivated to build this truck. I was going to use the micro springs from QFM and make them with adjustable mounting points for racing or bashing. another problem i have had was making 4 a-arms exactly the same with plastic. does anyone have any suggestions?
I also made a monster truck chassis that will use straight axles and 4-link suspension, also the same size as a zipzap. vinnyg.

Betty, those dirt bits are awsome. you caught some huge air in that hummer. did it land from that height or did it just bounce on its lid after it hit the ground?

Last edited by vinnyg; 04-08-2004 at 08:26 AM.
Reply With Quote
  #30  
Old 04-09-2004, 09:57 AM
MicroSpeed's Avatar
MicroSpeed MicroSpeed is offline
Registered User
 
Join Date: Jun 2003
Location: Raleigh, NC
Posts: 774
Send a message via AIM to MicroSpeed
I'm thinking about taking my MS Sport, doing both suspension mods to it, then getting a dual cell and Stage 2 fet mod. I really want one of those H1 bodies for it, because I've already designed a very small "Whipper Snapper" (little fireworks that you throw on the ground and they pop) launcher with a revolving turret. If I made two then I could stage a micro-rc war in my driveway! Or am I getting a little carried away?
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Got the car painted NissanGTR01 XMODS Mods and Projects 0 01-14-2004 06:38 PM
Tuning Basics sperry XMODS Parts and Hop-Ups 12 11-19-2003 01:56 AM
ultimate micro rc car ronak26 Bit Char-G Mods and Projects 2 01-27-2003 02:27 AM
Cat5 vs Cat5E for car antenna material mechanist ZipZaps 6 10-13-2002 01:59 AM


All times are GMT -5. The time now is 04:07 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
shop.tinyrc.com Products
Tiny RC Community News
[03/17/10] Kyosho Mini-Z F1 MF-010 SP2... : The Kyosho Mini-Z F1 MF-010 SP2 Carbon Limited ASF 2.4GHz Tx-Less Chassis Set - more»
[10/23/09] Kyosho Mini-Z MR-03 In Stock! : The Mini-Z MR-03 (http://mr-03.com) is now In Stock and Pre-Orders are shipping! - more»
[09/06/09] Labor Day Savings - $5 Off... : Labor Day traditionally marks the unofficial end of summer - but we're not ready to let go! So, we - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts