Broken steering wires
 

I accidentally broke two of the tiny red wires leading from the PCB to the steering magnets.

Are these repairable, and does someone have high quality pics showing which ones go where?

carefully look through the forum... i know there are pics somewhere. It's a bit tricky, but i've repaired them numerous times. You just need a soldering iron.

The Pcb is Labelled
 

If you carefully look at the pcb where the copper wires remaining are soldered you will see that one wire is soldered to location marked L for left beside that two wires are soldered to battery negative terminals ( usually a bigger blob joining two pads together ) and the next spot over should say R for right resoldering them is rather easy. and as far as making sure which one is which if both are off the left or right side i have noticed it doesnt matter which one one goes where just have to be L + and B - i believe.