![]() |
feedback from pullback owners
ok i know theres several posts on pullbacks but i want a summary of how they are.
first how are the bodies compared to the bits? identical? cheaper? wheels? is the axle diameter the same as bits? tires? any other useful parts? anyhow i just ordered one from ebay for 6bucks with 4bucks shipping and 3bucks for the money order and postage. are they worth 13bucks? please dont answer with "well i read on this message board that they do this or have that". i want opinions from people who actually have them. |
The wheels are nice and fat and sticky(soft), I am not sure about converting them to bits, I haven't tried YET. However it would be in a best interest to convert them and they would be awesome for getting rid of wheel spin.
All I know is I got a supra and the rims were NOT 5 stars, which dissapointed me. I also payed about 13 bucks for mine. The body was a black supra and as far as I can tell it is identical. Althought the Bit supras look like trash so I am going to sell the body. |
isnt selling your body illegal?
|
Re: feedback from pullback owners
What's up hog- I'll try and answer your queries as best I can;
RE: first how are the bodies compared to the bits? identical? cheaper? Easy one, They're identical to the Bits RE: wheels? is the axle diameter the same as bits? tires? The axel diameter is exactly the same... it's a bit shorter than the Bits. If you intend on using the wheels on the bit, you'll be srappin' the axel anyhow and trimming the Bit axel about 1/8th inch to fit properly. Tires; Smaller diameter as compared to the Bits, super soft and extra wide. RE: any other useful parts? No, not really... that I'VE found a use for. Honestly I didn't and probably wouldn't pay $13 bucks for it. *shrug B |
could the entire axle be taken and shaved (much like KIT racer axles) and used directly on a bit, kwibb?
and im payin about 5 dollars canadian each... im gettin 3 :) |
ya the main reason i did it was for the 2000gt-r body. my car runs like a muscle car so it should look like one huh?
i have a drift axle(which is pointless to me) so ill swap the pullback wheels onto it and see if i like. my buddy has a bunch of taps and punches and vices so im sure the wheel surgery should go fairly easily. has anyone successfully transplanted front wheels from a pullback yet? |
Quote:
BTW sweet deal on the PB (pullbacks) B |
awwwwww, booooo.... ><" now i gotta transplant wheels.... heh, npnp... i tore up an axle to do the fullsize wheel mod.. then i chickened out.. .and now i got wheels and an axle and an orange gear lying around... hehe, i know what im doing to my skyline pullback when i get it now :D
|
Quote:
RE: has anyone successfully transplanted front wheels from a pullback yet? Yes I did, you've basically got the idea with the taps and vise... just be super careful. I slipped and put a nasty gouge in one of them. :( Good Luck |
thx kwibb!
i found that to smack the front wheels out of the knuckles, it's actually Very simple... you know the holes in the controller for the screws? grab a hammer, and a really thin nail or Thick paper clip, put the knuckle on there so that the wheel presses on the hole (in a way that the pin can fall into the hole) and just bash away at the back of the pin with the nail... :p |
cool im all amped on this now. should be here in a week or so.
how does the thicker front wheels effect steering? |
i suppose it's gonna be like putting STICKIES on the front, allowing quicker and tighter turning... but the back must be equally sticky, or the car is simply gonna spin out..
i would actually suggest Bit tires/rims on the front, because the narrower the tire, the better the cornering, with the possible exception of loss of grip.... you will notice that most extremely high powered street cars have narrower tires in the front than in the back.. even the FF(front engine, front wheel drive) cars have quite narrow tires on the front for better handling, trading off acceleration. |
thanks guys. i feel slightly less stupid for paying that much now.
so different pullbacks come with different rims? what ones do the 2000gt-rs come with? |
i think they all come with the same 5 star black rims... smaller diameter than Bit rims tho...
i heard the black supra Doesnt come with those rims tho.. o.O" im sure the 2000GT comes with the black 5 spoke.. |
Quote:
|
i heard the supra comes with different rims.... lookin @ cyber brat's post ...
i think the rims are sturdier (fatter, wider spokes) MAYBE because pullbacks are more for kids, and they tend to recieve rougher treatment... like stepping and crushing etc... just a thought =P |
The rims on the ae86 Sprinter Tureno are kinda ugly and not 5 spokes like the others i hear.
The body is identical to any bit body as well. |
:eek: really? what do the trueno rims look like?
|
Quote:
silla |
I wish i could describe them. There are kinda like a full wheel with small vent like cut outs. I'll try to get a pic of them ASAP, but that won't be for a few hours (damn work and side jobs).
|
Quote:
|
Quote:
I hear ya on the work thing.. check this out.. http://bitpimps.lixlink.com/pages/ph...topic.php?t=68 silla |
im thinking... go watch initial D.... maybe those little 13's are the rims on those pullbacks!!
|
I dont know how good my camera will do. But i do have a scanner too..
I have been so tied down i dont go to bitpimps alot. |
Here you guys go, neither turned out all to well.
http://64.178.59.162/ae86wheels0001.jpg http://64.178.59.162/ae86wheels0002.jpg http://64.178.59.162/ae86wheels0003.jpg |
interesting, they remind me of hubcaps on a 1984 chevelle... lol
BTW- BT I see you've got a G4 mouse pad there (I think), is it your weapon of choice? |
hey pie where you get those i pay like 13 canadian for mine cuz there's only 2 places i know of that sells it lol where do you buy yours...if it's in alberta i probably wont have access to it but i just wanna know.
|
1 Attachment(s)
i put pullback wheels on my bit.. but i painted them white
the grip is awsome and the performance (they are both front pullback wheels) |
hmmm those DO look like the rims on the 86 from initial D :D
yep, it's in alberta, and im not getting them in until about mid april... a friend is bringing some back from japan for me... hmmmm i cant remmeber if it's 5 or 7... eh, a toonie's not much diff anyway ^_^ Bomex that looks KICK AZZ.... ! seriously! remind me to do that when i get mine :) |
I have the 2000 GT-R & Treuno pull-backs...
The 2000 GT-R has the same "slotted" rims as the Treuno pictured above.
By the way, the STICKY pull-back tires DO fit on regular Bit rims; The small fronts stretch nicely over the large rear Bit rims and fit with no rubbing. The wide pull-back rears work on the large Bit rear rims if you carefully trim the inside edges for gear & chassis clearance. Hope this helps! John |
Hey, just a question Bomex, do the knucles swap in and out like bit ones? Or do I have more to worry abou than a back axle?
|
i have 2 pullbacks
1 Attachment(s)
i have the 2000 skyline & supra they both had the same wheels as shown earlier
my bit now has both sets of back wheels on it so all wheels are same size they are loads wider than bit wheels (see below) |
Now that's what I'm talkin about son... Those are so phat I have to jump back and kiss myself...lol
silla |
interesting.. so i guess there's TWO kinds of pullback rims, randomly thrown around.... i intend to transplant the rear rims and wheels, and possibly fatten out the body with fender flares to make it look MEAN :)
|
Well, heres what rims I have on my pullbacks;
R34 - five star R32 - five star 2000GT-R - flower Supra - flower AE86 - flower NSX - five star The flower lookin' rims are interesting, it looks like a 5-spoke but closer examination reveals that the area between these so called "spokes" are filled, but they are raised towards the ends and they end like about .9mm from the rim edge with a gap. I wished they used a 6-spoke design too :( |
I find the "Flower" design Ugly I wanted 5 spokes dangit
|
thx for the info dookie! hmmm i dont mind that flower design, from what i see... care to share it in a little more detail cyber brat? (pic?) thx!
|
Quote:
That is just the original disk case (OS 9 and OS X) for one of my side jobs i do. I do have an older iMac and it will soon be running OS X i think. If i had some real $ i would be all over the new G4's with dually processors and that nice 24" wide screen LCD...**DROOL** |
Quote:
Quote:
That HD 24" screen though... there is nothing more desirable. *drools lol |
ya all 3 games for the mac probably look pretty nice huh?
|
| All times are GMT -5. The time now is 10:51 AM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.