![]() |
Post your drag times here!!!! FUN!!!
Okay I want to start this thread to see how hot everyone's mods are. This is a simulated 1/4 mile drag. Scale is actually abit over 47ft so let's make it 50 for convienence sake (and because that's what the mini-z guys are doing and I want to show them that the xmod guys CAN keep up with them). Use stopwatch or lap counter. I will post mine this weekend (as long as it don't rain).
Rules.... 1. Don't lie, it's pointless..... 2. Post ALL of your upgrades ie....motor type,# of teeth on gear used, # of cells, bearings, glued tires, shaved springs etc......anything that did not come in the original unopened xmods box. 3.List the surface you ran on ie carpet, concrete, blacktop etc..... 4. Just like a REAL drag race, begin at a complete stop....NO ROLLING STARTS!!!! NO RUNNING DOWNHILL!!!!!! 5.HAVE FUN!!!!!!!!!!!!!!!! |
no down hill well there goes my home drag (i live on a hill) ahhh oh well i guess ill find an empty place in the mall to do it
|
ill post mine as soon as i get my sky running again
|
I'll do this 2 morrow!
|
I have a RSX (St. 2, 10 tooth, bearings, stiff springs all around, 1.5 tierod, body kit, 4 cells, custom paint,)and i was down at the tennis court by my house and i found out that from the back of the fence to about 2 feet past the net it almost exactly 50ft... with fully charged batteries...we timed it 3 times and the average was 4.8 seconds:D
|
to scale wouldnt that mean its a 14.8 sec. car in the quarter?
|
How did you get 14.8 sec???...I don't think you scale time...because time is a constant...but im not sure about that :rolleyes:
|
come on guys, basic algebra :P
50ft/4.8sec * 60sec/min * 60min/hr * 1mile/5280ft = 7.1Mph |
I haven't done any "quarter mile" runs, but my XMODS has been clocked on radar at 11.2 mph in stock for form.
|
Where'd you get the radar gun?
|
i think he has one of those that cops have.
|
If the algebra is saying that it goes 7.1mph then how come when I set my treadmill to 15mph my car has no problem going faster???
|
No idea. I don't see any mistakes in the math, its just unit conversion really. Also remember that the drag time is from a stop and the 7mph is not your top speed, but your avg. over 50 ft.
|
Just tested with my friends rsx, mods include awd and light kit everything else stock.
avg time was 4.4 sec and best was 4.35 I was very surprized to find these cars so consistent. NOTES: this was run on a slight incline but I ran it both up and down to get an average. Did not seem to make a difference in time though. This was run on a freshly paved asphalt road, so it was only slighty bumpy. Hope to see a stage 10 time! |
I think RedRSX is right, you don't scale time. So your 4.X times are exactly that for 1/4 mile time. And it makes sense to me because Xmods look like they are going faster than their 1:1 counterparts would (11mph = over 300mph!).
|
Yea I totally agree with Superfly...When you watch your xmod scream down a street or a tennis court...does it actually look like its going 7 mph...i mean come on....i have to sprint to try and catch it and i still cant even get close to it
|
How long are your legs? just kidding.
I've seen a bit of both on reported speeds. I've seen many people say that its about 8pmh or so, and many like you that maintain it must be going faster than that. Maybe this will encourage someone to pick up a cheap radar gun :P Well, check out my math, but I don't think I made a mistake. |
You math seems fine...its just that its 7MPH!! that seems really ridiculous...Just run it on a lo9ng straight and think to your self if that looks like 7 mph
|
Haha, I definitely know what you mean, tho I have a mini-x, not an xmod (tho I read the xmod forums since there's a lot of interesting discussion and I'm pretty new to RC). They seem even faster if you run 'em inside.
|
Ohh for sure...it seems like they hit 60mph when your weeving in your kitchen or wherever you race it. So what is the difference between the mini-x and the mini-z...and also how do the mini-x's compare to a fully upgraded xmod?
|
Hello :) my girlfriend just came up with a real good idea she said I could probally use a speedometer for a mountain bike or some sort to make a miniature dyno. How accurate would a method like this be?
|
The way a bicycle sppedometer works is there is a little sensor on the spokes of the wheel and a little reciever on the front fork...and as the sensor goes by the reciever is clocks how many times it goes by a second....so unless you can put a sensor the size of a xmod wheel inside the wheel and attach the reciever to the outside of the fender it would never work( BTW you will never be able to do that:D)
|
if anyone has a treadmill put ur car on the track and slowly increase the speed of the treadmill and the xmod (might need 2 people):D :bdrop: im about to go do that once i get my car fixed
|
I have already done that and my treadmill tops out at 15mph and my xmod can still go faster:D
|
stinky
I used the Stage 2 yellow motor....everything else stock except for the rear tire glue. and got 5.23, I lost a LOT of torque with the stage 2 yellow. higher top end though.....LHS was out of stock on the X-speed, placed order and should be in on Wednesday
|
X-Speed is the exact same as Stage 2: 30 gauge, 49 windings
7.41 mph is average speed, i know their is a furmula to calculated final speed but i dont know what it is. i'll ask my teacher today. |
ok i got it : V=(f/s) , Vf=2V
so if (50/4.8)=10.42 , 2(10.42)=20.84 fps 20.84 x 60sec/min x 60min/hr / 5280 feet/mile Final speed is 14.21 Mph. thats top speed in 50 feet, not top speed of the car Ps. scale speed= 397.85 mph scale quarter time= 13.44 sec:eek: Edit: to get scale quater time or speed multiply actual time/speed by 28 ( because the cars are 1/28 scale) |
for 50feet=14.21mph thast pretty fast if you ask me:D
|
I dont think that you scale time...because time is a constant...and plus...if it had a top speed of almost 400mph(scale) then dont you think it would do the scale quarter faster then 13 seocnds...
|
hey!
This Post was supposed to be for posting simulated 1/4 mile drag times, no arguing scale formulas! So far there is only like 3 drag time posts! None of which are even close to mini-z speed. I'm getting disappointed here.....Somebody with a NML, X-speed or 6 cells installed....PLEASE POST!!!!
|
What are you getting so mad about?? and when were we comparing these to mini-zs??? Mini-zs are like $120...if you gave me a stock xmod and another $70 to put in to the motor...i could absolutley murder a mini-z...its like trying to race a Nissan 350Z against a Ferrari Enzo...you just can't do it...unless you make the prices equal So just chill out:p
|
He's allowed to get a little mad since he started this post and has had only a few replies that have the data he was looking for.
My RSX (st2 red,bearings,AWD,4 RS AAA's batts) 32.8084 feet(10m setting) in just over two seconds on a tamiya speed checker. |
Not mad
I'm not mad, just trying to get things back on track.......the train seems to have left the rails......I was REALLY interested in comparing the times that the mini-z were turning in this exact same test (which I found in at minizracer.com), and the X-mods are seriously lacking so far....
|
btw RedRSX
You said that you can't compare unless the prives were equal... THAT's GREAT......that's why I WANT people to post who bought their $60 NML motors, stuck in their ball-bearings, added on a turbo fett etc......that's why I asked that people post their upgrades.......sounds like you never read the initial post and hopped on the train after it jumped the tracks......no harm though.......just trying to get a feeling for what's going on when somebody buys a $90 Mini-z, dumps in a $15 x-speed motor and then races it agains somebody who has an $50 X-mod with a $50 NML motor, 6-cells, bearings etc......then the prices would be equal. Also interested in seeing thouse who stuck in x-speeds, NMLs, Plasma Dashes etc.....just how well they're running. This post is for EVERYONE'S benefit. Will help people build the best cars by seeing what others have done and seeing their RESULTS!!!!! My advice, grab a stopwatch and a tape measure and tell us what your car does.....don't even care if it has NO upgrades.
Cheers, dude!!!! |
Your right...i didn't read the first post very well...I wanna get one of those NML...but they are so expensive and i dont wanna dump that much money into it...I have a RSX with a St.2 10 tooth, bearing, stiff spring all around, tires, wheel, body kit, and, AWD and mine ran about 4 seconds maybe a little more...
|
check this
use my tennis court method i have outlined in the "you=slow" thread.
|
| All times are GMT -5. The time now is 12:35 PM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.