![]() |
What I will do with my Xmods once I get tired of them...
1 Attachment(s)
I will find something they will be good for...
|
LOL!!!!!
That is so funny. Where did you get that r/c? |
Tower Hobbies.
All I can say is WOW!!!...The torque and speed are insane. This is the most fun I have had with an RC...PERIOD! I was jumping it off of a 3 foot deck and it wouldn't even bottom out. LOL |
wow very nice
how much was it? and how fast does it go? |
wow how fast does it go. my friend crashed his t maxx at full speed into a mailbox and destroyed the front end!
|
They claim it goes 30+ mph, and I believe them. There is no way these Xmods are reaching 25mph, if this thing is doing 30+, this thing just flat out hauls, and does mad wheelies. The manual 2 speed transmission is nice too.
The combo pack was around $400...RTR. |
herherher :D
Another thing that they're good for is shipping them to the Northwest...I'm not sure why...just do it :P
|
Now you know....
And now you know the joys of being a Monster too!!!! heh heh heh...if you think THAT's fast, get yourseld a NOVAK Super Rooster ESC and 2 Diamond Speed Gem Kryptonite engines and watch it hit over 55mph!!!! Another suggestion, dump the 2 7.2V battery packs that you probably have in it and go for 2 8.4V hump celled packs. I got a couple for 19.99ea. at HobbyTown USA. If you do the engine mod. PLEASE get yourself a couple of heat-sinks because they will get HOT HOT HOT....um also, hope you have a 15min or quicker AC/DC charger. If you get a 7cell (8.4V) batt pack then make sure your charger has a 6cell/7cell 7.2/8.4V switch on it...
HAPPY MONSTERING |
put an xmod body on it..........
|
?????
What I will do with my Xmods once I get tired of them...
BC.....i can always use a couple more....:D ;) |
Yeah, I plan on at least getting the 7 cell batteries and some heat sinks, they do get hot! I bought a peak charger that had the 6/7 cell selector and 2-4 amp. Right now I'm running 2400mah batteries, but will upgrade to 3300.
|
Quote:
|
BC, where do u get the money for all this stuff
|
he has a good job:p
|
i'm wondering, i have no experience with RC's of this scale and class, how do you switch gears on teh 2 speed tranny? you said it's manual....is it set with a mechanical switch on the car like those cheap RC's at toys'r'us or do you shift it with the remote through a 3rd channel?
|
4G63T, are you registered on street speed gaming?
|
Very nice emaxx Bad Co. I have a traxxas nitro rustler. I agree that you haven't seen fun until you've driven a traxxas. It won't be long now until you dive deeper into the realm of NITRO! Nitro is the coolest! The newer 2.5 Nitro Rustlers run 50mph out of the box. They're crazy fast. Here's a killer site with tons of RC bashing. Check it out! These guys are insane! hehe :D
http://www.slapmafro.com/ |
What I will do with my Xmods once I get tired of them...
Howdy,
You made a good choice there man. Traxxas makes some of the best Monsters on the market right now. I know I have three of their trucks. Two Stampedes and a T-Maxx. Have had one of the Stamps for like 5 years and have never broke a suspension part and I use to race every weekend with the truck. They really are great trucks. Here is a pic of my trucks with my Skyline. Left to right: Stampede2, T-Maxx, Stampede1. http://www.jbnets.net/TTT/My_Trucks/Maxx&Stamps002.jpg Later Easymoney |
Runtime right now on brand new 2400mah batteries is about 12-15 minutes using a peak charger. I should be able to get 25 they say with the 3300mah. To change gears on it, there is a little toggle at your thumb on the controller...you let off the gas (no clutch), and flip it with your thumb, then nail it again.
I'm sure I'll dive into these full bore too and be constantly upgrading and maybe get a nitro later. Heck, I'm already looking at a full aluminum chassis. ;) Nice trucks Easymoney. I'm thinking about getting the Hummer body too. I've seen some tight bodies I want to slap on this thing. |
Quote:
why? |
Nice, you got an E-maxx. I wanted that one, too expensive though :D I got a Traxxas Rustler electric instead 2 weeks ago(I ordered it from HobbyTron.com cause they are always cheaper and they have cupons each month). This is my first large scale RC. Whew it is fun! I'm only running a 6 cell. Here's some pics of it with my supra:
http://home.comcast.net/~werdna12/Trust1.jpg http://home.comcast.net/~werdna12/Trust2.jpg http://home.comcast.net/~werdna12/Trust3.jpg Oh yea, I forgot to post a wheelie vid :D http://home.comcast.net/~werdna12/102_0283.AVI Hmm... anybody know what other bodies fit on Rustlers? ;) |
Because someone has the same avatar and name.
|
Geez, Bad Company how much was the shipping?
|
Quote:
|
Rustler bodies
Any 1/10 or 1/12 scale body will fit on it, they come unpainted and you have to cut the wheel wells out yourself and drill the body-post holes. You may also need to cut some of the bumped and skirting off of it because of the low gorund clearance. You can use 1/8 scale bodies (E-maxx) as well, but you'll be trimming even more off the skirting and bumpers plus you'll have to extend the body posts a bit too. I would just stick with the 1/10 or 1/12 scale bodies. Here is a good place to start:
http://www.parmapse.com/rccatalog.asp?one=TRUCK |
Nitro is always fun:D
I have a nitro TC3 (never been to crazy about trucks) and it HAULS. Probably goes about 35 with the pitiful stock engine and single-speed transmission. And it gives drifting a whole new meaning, especially with cheap rubber tires on.:) |
Ohhhh Man, i've had my share of r/c's. A wide viarety from on-road to monsters and boy are they fun!!! From Nitro to Electrics!
|
trucks!
I'm just partial to trucks because I like the insane jumps I can take and the rocks, sticks, mud, snow etc...that I can run over with the higher-than-buggy ground clearance. But really the Rustler is just a buggy---so he doesn't know the true joys of truckin' yet... tip: If you wanna be a BMF go grab you a DuraTraxx 8T ESC (&70), a Diamond Speed Gem Kryptonite 9T motor ($25) and a 8.4V Batt pack ($20).....Stock, those trucks do about 20-25mph...but with this stuff you can hit close to 50mph...heh heh heh heh heh heh heh......oh...forgot you must get a clip on heat sink for the motor too ($8) and keep a pile of charged up battery packs on hand...
|
hey BC I saw you E-maxx awesome any upgrades? I also have a 1/10 car a Traxxas nitro sport. Mine goes about 40 stock,( which is fast enough for me) and alot less than yours($270.00) although mine is a st instead of your mt.
For people who dont know Mt=monster truck St=stadium truck |
Right now I'm looking basics...
Aluminum skid plates, bumpers, servo cage, motor heat sinks, maybe big bore shocks, 7 cell battery packs. Any suggestions? |
by the way i forgot to say mine is a nitro DRIFT MACHINE
|
I love monsters Ive been in rc for about four years and I'm 14
I have on kyosho tracker 2 one traxxas stampede (soon to be brushless) one traxxas t-maxx those are bad @$$ and the little tike the micro rs4 the micro has a TO u-power chassis to elite mod coreless ball diffs steel dogbones novak spy esc 9t pinion well evn mmre off topic seems how its on popic have you ever thought of goin brushless in your e-maxx I would have bought a E-maxx but lack of the $ I went stampede im very happy with it this brushless is for the e-maxx http://www2.towerhobbies.com/cgi-bin...?&I=LXBLB8&P=7 BOOM |
1 Attachment(s)
I thought about getting some street type tires, lowering the travel a bit, and getting a Escalade body for when I want to run on the strret.
Here is the off road body I might get... |
I think brushless will be down the road a bit.
|
amen to the drift machine. i have a hpi rs4 3. i put a tune pipeand a 2 speed tranny with a skyline body. that thing drifts sooo good i love it. also i recomend any one who has a pullstart to replace it with a roto start. youll save money on buying pullstarts every other week!!!
|
Ohhhh yes my friend i have pulled to hard a couple of times and there goes a good $25 on a new pullstater, which sucks (BC EDIT: Word removed) Now i have non-pullstart engines on my r/c's
BC EDIT: Please watch the language, this is a family forum. |
Quote:
|
Yo BC!
I've had a traxxas stampede for around 5 years. I have a long- arm set up on it, and it's got INSANE articulation. I can put any wheel on a coke can, and still have the other 3 on the ground. It's really fun.
The best source for traxxas info is ultimate traxxas Lots of neat ideas over there. |
Tmaxx or Emaxx witch is better I've never driven a nitro car and was wondering if their better than electric
|
TMaxx vs. E-maxx
The T-Maxx(gas) is faster than the E-Maxx but the E-Maxx has more torque. I saw a contest where they hooked the rears together and the E-Maxx drug the T-maxx all over the place. IMHO the gassers are a bit too messy and you have to be damn near a small engine mechanic to keep one running. Plus they take a special (fuel) not just 87 octane like you throw in your lawnmower, the stuff it uses looks more like winshield washer fluid. That can get a bit more costly too. IMHO, leave the gassers to the pros.
|
| All times are GMT -5. The time now is 05:12 AM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.