TinyRC.com

TinyRC.com (http://tinyrc.com/forums/index.php)
-   ZipZaps (http://tinyrc.com/forums/forumdisplay.php?f=75)
-   -   Finally got a black Civic. (http://tinyrc.com/forums/showthread.php?t=11381)

Bad Company 06-02-2003 09:45 PM

Finally got a black Civic.
 
1 Attachment(s)
The first thing I did was put the body on the chasis I modded for my Yenko Camaro. What do you think?

Bad Company 06-02-2003 09:49 PM

1 Attachment(s)
I want to do another wheel mod specifically for the black Civic. Which wheels look better? These?...

Bad Company 06-02-2003 09:53 PM

1 Attachment(s)
Or these?...

flatlander_14 06-02-2003 10:15 PM

those are insane! how are you going to mount the electronics into the custom chassis? very nice! i like the 2nd wheels for a black civic btw. i think the first ones are more of a muscle car sort of rim.


ps - until i find out my hours, ill have to see whether or not i work on july 4 or not. ill see if i can come into work another day so when you come to va beach we can hook up. my cars need style, ill help you with performance to make it even faster than it looks:D

isk8blind 06-02-2003 10:18 PM

is day the black 0nes are the best

Bad Company 06-02-2003 10:48 PM

I will actually remove the wheels from that chassis and mount them to the Zip axle and knuckles like I did with the Yenko Camaro wheels. The wheels on the chassis are actually from a DUB 1/64 car. You can't see it in the pic, but the black wheels have disc brakes behind them.

Flatlander: No prob. I will be down there all weekend, so we will work something out. If you have something in mind you would like me to do, you can tell me ahead of time, and I can have it when I come down.

CheeseWarfare 06-03-2003 12:01 PM

How do you mount them on the ZZ axle?

viperkilla 06-03-2003 03:15 PM

how'd you get your black civic....ive always wanted one....i like the first set of tires......by the way NICE rims

Bad Company 06-03-2003 06:06 PM

My wife knows someone at RS that can get older models.

As for mounting the wheels. I remove them from whatever car they were on. Then carefully twist off the front wheel pins from the knuckles. Next carefully hand drill holes in the front wheels. Then reinsert the wheel pins through the new front wheels. It should still be nice and tight fit.

For the rear wheels, I twist off the existing Zip wheels fron the axle, but leave the gear. Carefully drill holes in the new wheels the exact diameter of the axle. Put a drop of super glue on the end of the axle and press fit the new wheel all the way up to the gear. (You may have to shave some of the rear of the wheel first.)

On the other side, slide a piece of Q-Tip stick over the axle.(Mine was 1/8" long, but may vary on wheels.) Now put the glue on the axle and press the wheel on. Adjust how far the wheel sets equal to the other side. Cut the Q-Tip to fit between the wheel and the notch in the chassis.

viperkilla 06-03-2003 08:49 PM

hey ahh5hit is there a way ur wife can pick up a black or blue civic for me??? :)

NitroBurner 06-04-2003 12:42 AM

Hey Ahh5hit what did you get those wheels from? Those wheel look good on that Civic! I want some!

**EDIT** -Nevermind man I found some.. Thanks for the tips!

Bad Company 06-04-2003 04:04 PM

viperkilla: I'll see if I can get some more. I would like to get a couple more myself so I can mod them.

Bad Company 06-04-2003 09:59 PM

1 Attachment(s)
Here is a pic of the black wheels with the disc brakes behind them. The next step will be to drop the car.

NitroBurner 06-04-2003 11:21 PM

Hey would you be interested in selling those Yenko Camaro wheels and tires to me? I bought some like it and screwed em up.. they would be hella nice if they are solid and not "wiggley" like mine were..

DriveWRX 06-05-2003 12:25 AM

Quote:

Originally posted by Ahh5hit
Here is a pic of the black wheels with the disc brakes behind them.
Ahh5hit, those are Muscle Machine Import Tuner wheels right?
How does the car drive with them?
I did the same mod to one of my Bits, but now the car won't go straight. And I don't mean veering to the left or right, more like a shopping cart with a bad wheel.

Did I do something wrong? :confused:
Would you show a pic how you mounted the fronts?

strider_mt2k 06-05-2003 06:43 AM

Nice wheels!
I'm thinking of doing small KIT Racer mags with lowered tabs just for my black Civic body. It's cool!

Bad Company 06-05-2003 04:44 PM

1 Attachment(s)
Yes they are Muscle Machine Import tuner wheels. I don't have any problems with wobble, but it does have a wider turning radius now. Just make sure you push the pin as tight as you can into the knuckles, but still have rotation. I did have to shave some of the pin on the back side where it was now sticking through the knuckle and rubbing. The back half of the wheel mounts to the axles, and the "hubcaps" fit up to the back half. The tires wrap around the two halves and hold them together. This way, you can swap out the "hubcaps" with any Muscle Machine Import Tuner Car just like the Zip Zap wheels.

This pic shows how the original pin sticks thru the back half of the wheel. The front half just snaps right in place.

Bad Company 06-05-2003 04:52 PM

1 Attachment(s)
This pic shows the seperate pieces of the wheels.

Bad Company 06-05-2003 04:56 PM

1 Attachment(s)
This pic shows two different "hubcaps" on the wheels. The cool thing about these is that the "hubcaps" can be switched out just like the Zip Zap wheels.

NitroBurner 06-05-2003 05:48 PM

I got the exact same kit you got.. I had the back wheels on perfect! But the front was a different story! I used a dremel to bore the hole bigger for the zap axels and i got atleast one that fit slugly and was bored out pefectly for the pin head too! But when I pressed it into the knucle it like bent the pin into the wheel and cause it to wobble from then on! That happened with almost every wheels I tried to do on the front! So its back to K-Mart tomorrow to get more.. :-\

This time I am going to use a drill instead and I am going to get a special tool for pressing in the pin.. And I am going to take my time doing everything.. And I am going to buy 10 of those Musclemachine Import Tuners this time.. lol!

NitroBurner 06-05-2003 05:51 PM

AHH5hit do you have any better pics of your Yenko Camaro wheel conversion? I kinda like the looks of it better than the Import wheels!

Bad Company 06-05-2003 05:52 PM

You seemed to everything right. The only difference, I used a hand drill to bore the hole. But as long as you only open the hole the diameter of the pin, you should be OK. You do have to be very carefull pressing the pins back in. I had that problem the first time I did one of these wheel mods.

Bad Company 06-05-2003 06:00 PM

1 Attachment(s)
I'm not sure what you want to see. I did that conversion the exact same way.

Bad Company 06-05-2003 06:02 PM

1 Attachment(s)
...

NitroBurner 06-05-2003 06:27 PM

Thanks man.. I just wanted to see if you did anything different.. I will try to be careful next time when I do this.. I went through a set Import tuner wheels before I got the hang of things but by then I only had the rears on and only 1 front.. lol

Thanks for the info man! Did you need to file away any of the body for those Yenko Camaro wheels to fit? LMK!

Bad Company 06-05-2003 06:33 PM

No I didn't file any away. They will rub if you turn the wheels all the way, but when you are running the car, they won't turn that far anyway.

NitroBurner 06-05-2003 07:57 PM

I see.. Thanks man!

Hey by the way if your not going to use those Camaro wheels for anything would you sell em? It would save me alot of hassle.. LMK!

Bad Company 06-05-2003 08:06 PM

I do use them...on my Yenko Camaro. IMO, the best wheels for it. Keep practicing and have patience. I messed up a couple of wheel mods before getting it right.

NitroBurner 06-05-2003 08:10 PM

Will do man! Thanks for all the tips! I will post pics of mine asap!

flatlander_14 06-05-2003 08:17 PM

well, i know what im getting you to do to my car when july 4 rolls around:D i live in the perfect place too for on the spot mods haha. a radioshack that always has everything in stock and a kmart for the import tuners:D all within a 3minute walk:cool:

oook back on topic: good job, i like all of your body mods hehe. cant wait til i get to see you in action doing surgery on my car lol. (imagine a little kid asking the surgeon to watch as he pulls out his daddy's spleen:D ) also, if its portable, can you bring your digital camera? i need to get a lot of my mods online lol.

Bad Company 06-05-2003 08:50 PM

Sure thing flatlander. I guess I will just wait and do the mods down there so you can see how it's done. I will bring my camera and my Dremel and tools just in case. These mods are about the easiest you can do, you just have to take your time.

flatlander_14 06-05-2003 09:04 PM

Quote:

Originally posted by Ahh5hit
These mods are about the easiest you can do, you just have to take your time.

so THATS my problem!!!:D

cowfish_29 06-08-2003 12:46 AM

Quote:

Originally posted by flatlander_14
so THATS my problem!!!:D

yes, me too. I'm too impatient. I do have a question though.. will bit knuckles work in a zz chassis without problems? (they look too small, but i don't really know). If so, it would save me soooo much hassle. :D

Bad Company 06-08-2003 09:33 AM

Yes, Microsizers and Bit CharG knuckles will fit without any problems. Some clones will too, but some are too small.

cowfish_29 06-11-2003 06:29 PM

thanks man, i have bensu knuckles with pins that slide in and out just with my fingernails. I just might have to do it now!


All times are GMT -5. The time now is 06:37 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.