Mini Z Killer

[neurokinetik]

Only that much? It seems way more torquey than that...

[xxspeednplayaxx]

hey nero, what other upgrades could i do to add some more punch to my x-mod besides the 180 motor from that link (btw project blitz kreig should have some pix posted soon)

[xxspeednplayaxx]

materials needed:
-Four mini BMX pegs (the ones you use with your hand)
-Soldering iron
-Wire cutter (the kind that looks like a needle nose pliiar
-Peice of sheet metal or a peice of metal from a pop can (as large as possible a 3X3 inch peice should do...

What to do:
-place your stock wheel (with no tire on)on a peice of paper and outline the circle of it, then draw out a design you wish to have
-take this paper mockup and transfer it over onto the metal you have choosing
-cut out the design from the metal
-make a hole at the center of your created design (this is the spinning part)
-replace your plasic wheel nuts with the bmx pegs
-slip the metal sheet onto the peg
-cut the excess peg and slightly melt it over, preventing the spinning part from falling off
-i guess you could use the stock bushings to aid in the spinning process

i hope you guys like this, its the best i could come up with (considering ive never seen a x-mod in person)

[xxspeednplayaxx]

hey all, yesterday i strolled over to my local hobbytown and found a great motor for only 5.49$ the motor is made for more torque but its revs are set to 2.4V so when i strapped in my xmod it basicly flew.. the motor is called "hoppin hydros.. big bad johnson motor" if your decent at soldering and have an x-mod motor to spare then id give this mod a shot... happy holidays and happy modding

[ImportCarRacer]

My friend did this and it flys!

He put two 2 inch bottles in his xmod and put helium air in it! Then he added a button that whould open up the bottles and let it come out of the exoushtion pipe. IT WAS SO AWESOME! Im planing to do that so its like NOS.

[charliebrown]

Hey, xxspeednplayxx, I know the PERFECT setup for your car.

FET upgrade

Team Orion Elite Stock motor, 180 sized, with 10-15 winds taken off each leg in the armature, and the blue gear setup.

All Wheel Drive upgrade

6 cells with IC-3 batteries

Suspension and Steering upgrade

A LOT of foil wrapped around your antenna (For more range! )

And, of course, the rubber tire upgrade to get a good grip on the road! If you're racing on concrete, you'll want the hard tires.

Chuckster...