need some info about light kits

[bengali548]

okay i found this sick way to get an underglow on xmodsource.com

so this is how it werks. first you buy 2 sets of command logic light kits 20 bucks in total i think?? one light kit is for ur head/rear lights and the other is for you underglow. now go get three straws.. k i dont really know how to explain it in a simpler way (srry kids below 12) but make sure that the diameter of the straw is equal or a bit more than the height and width of the led in the light kit. k got ur straw gud now measure the sides (front rear left and right) of your xmod (or i guess any rc this could werk for). cut your three straws according to the sides that you measured (the closer you get to the exact size the snuger it would fit) now you should have 4 straws all of different lengths (throw out the excess).get a marker or something that colours clear and colour the straws the colour you want (IF YOU COLOUR IT THE SAME GREEN AS THE UNDERGLOW KIT RS GIVES IM GUNNA SLAP YOU). now the tricky part. make a hole in the straws that is the EXACT width of the led in the light kit. stick your led in and SEAL EVERYTHING AROUND IT make sure its in there tight and there is no light coming out of the hole you made in the straw. no seal the two ends of each of the 4 straws with like.... use your imagination lol. and if you dont want to tape it you could use a bit of super glue on the top of the straw and attach it to the body.

now the part i wanna know. would the thermal heat from the lights be enuff to burn the straw.