I recently saw this suspension on ebay where some guy had made it where the shocks and the dampers went across instead of down. So i decided to try it out by making my own. It is AWESOME!!! my car clears turns better and easier without clipping on things it usually clips on. Also i lost weight because i took of a spring and a damper (not much but weight is weight) i'll post a pic in a minute. If you want to know how to do it all you have to do is sand down a plastic damper where you put a screw in, then sand the little bump on the one with the pole, then glue them together (make sure you sand good otherwise you won't turn as well as you could. Then sand just a little bit off of the pole and just a little bit more off of the connecting thing it goes in. Its kind of hard to explain but if you look at the picture you'll be able to see what i mean (i hope).
Threaded Mode