CJ's Xmods FAQ (Updated June 27th.)

[cj1267]

CJ's Xmods FAQ from CJ's Hobbies.net
This FAQ is for current and future XMODS owners. Please help keep this updated by visiting the CJ's Hobbies.

#1 They are 1:28 th scale and about 6" long.

#2 Known RS part numbers and prices.

Cat # Description Price
60-8001 Nissan Skyline Starter Kit $49.99
60-8002 Acura RSX Starter Kit $49.99
60-8003 Black Honda Civic Starter kit $49.99
60-8004 Blue Honda Civic Starter Kit $49.99
60-8005 White Toyota Supra Starter Kit $49.99 Retired
60-8006 Red Toyota Supra Starter Kit $49.99
60-8008 Black 1999 Nissan Skyline Starter Kit $49.99
60-8501 Stage 1 Motor Upgrade kit 26,000 RPM $12.99 Retired
60-8502 Stage 2 Motor Upgrade kit 30,000 RPM $15.99
60-8503 Foam Tire and Wheel Upgrade $7.99
60-8504 Tire Upgrade $7.99
60-8505 Suspension & Steering Upgrade $7.99
60-8506 All Wheel Drive Upgrade $14.99
60-8507 Racing Crystal Set $19.99
60-8508 Wheel Upgrade $9.99
60-8509 Lighting Kit $5.99
60-8511 Graphics and Decal Set $5.99
60-8512 Metal Ball Bearing Upgrade $19.99
60-8513 Black Honda Civic Body kit $12.99
60-8514 Blue Honda Civic Body Kit $12.99
60-8515 Acura Body Kit $12.99
60-8516 Nissan Skyline Body Kit $12.99
60-8517 White Toyota Supra Body Kit $12.99 Retired
60-8518 Red Toyota Supra Body Kit $12.99
60-8519 Tool Kit $12.99
60-8520 Carrying Bag $29.99
60-8522 Medium Xmods T-Shirt $14.99
60-8523 Orange Nissan 350Z Body Kit $12.99
60-8524 XL Xmods T-Shirt $14.99
60-8527 Large Xmods T-Shirt $14.99
60-8541 XXL Xmods T-Shirt $14.99
60-8542 Xmods Hat $9.99
60-8543 Xmods Keychain $4.99
23-350 Xmods Battery Charger $24.99
990-0458 18-Piece Narrow Oval Racing Track Set $129.99
Includes 18 bottom tiles, 18 side rails and a complete set of pins.
Completed track is an oval approximately 10 feet long and 5 feet wide.
Features two surface textures–low grip and high grip.
990-0459 28-Piece Wide Oval Racing Track Set $159.99
Includes 28 bottom tiles, 28 side rails and a complete set of pins.
Completed track is an oval approximately 11 feet long and 6 feet wide.
990-0460 40-Piece Wide "L" Turn Racing Track Set $199.99
Includes 40 bottom tiles, 40 side rails and a complete set of pins.
Completed track is an “L” shape approximately 13 feet long and 10 feet wide.
Modular design allows you to combine multiple starter track sets together to create larger and more spectacular layouts

Some special order parts my even be a lap counter and transponders.

#3 Xmods Bearings:
Xmod Bearings are unflanged and unsealed. Measurements are .235" Outside Diameter x .115" Inside Diameter x .079 Thick. In mm it is 3mm ID x 6mm OD x 2mm Thick. Have been told some Mini-Z bearings will fit. Note 3mm x 6mm x 2.5mm will fit in most places and reduce play and improve performance.

#4 Axles/Drive Shaft:
Axles are also .115" in diameter or 3mm.
Long Drive shaft 2.97 X 81L
Medium Drive Shaft 2.97 X 77L
Short (if there is one) 2.97 X 73L

#5 Remote:
The Xmods remotes that come with the cars are the ONE AND ONLY remotes that will ever work with the cars unless you replace the electronics inside (Receiver/Speed Control/Servo/Controller). Xmods Controllers with the same crystal WILL control other Xmods with the same Crystals.

#6 Manuals:
XMODS 1999 Nissan Skyline GT-R VSpec Starter Kit
XMODS 2003 Acura RSX Starter Kit
XMODS 2000 Honda Civic Coupe (Black) Starter Kit
XMODS 2000 Honda Civic Coupe (Blue) Starter Kit
XMODS 1997 Toyota Supra (White) Starter Kit
XMODS 1997 Toyota Supra (Red) Starter Kit
XMODS Custom RC Stage 1 Motor Upgrade Kit
XMODS Custom RC Rubber Tire Upgrade Kit
XMODS Custom RC Steering and Suspension Upgrade Kit
XMODS Custom RC All Wheel Drive Kit
XMODS Custom RC Racing Crystals Set
XMODS Custom RC Wheel Upgrade Kit
XMODS Custom RC Command Logic Lights Kit
XMODS Custom RC Metal Bearing Upgrade Kit

#7 Wheel Nuts:
Wheel nuts are 2mm. Stock nuts are plastic. Most 2mm Lock Nuts should work. 2mm Lock nuts are used on the Mini-Z and the RS4.

#8 Mini-Z parts:
Bodies: Will NOT fit with out modification to the body mounts. Not all Mini-z bodies wheel basses are the same. So you may need to stretch or shorten the chassis on a Xmod. Changing the chassis length will also require changing of the drive shaft.

Battery Clips: On the Original Mini-z the clips can fit with minor sanding or fileing. The MR-02 is a new design and not at all compatible.

Motors: Mini-z motors will physically fit in the Xmod but the stock electronics may not be able to handle the faster more powerful motors. Also you will need to invest in a Pinion puller from a hobby shop that sells the 1:24 scale slot cars to remove the brass pinion on the Xmods motor. Don't forget your soldering iron as well.

Tires: The rubber tires on the Mini-Z can fit but since the Xmods have a raised part in the center of the wheel they will have a raised center when installed.

Part 2 listed further down

CJ's Xmods FAQ with Photos of parts