TinyRC.com - XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q, Forums, News, Pictures, Parts, and Shop
Forums, XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
XMODS Hop-Ups, XMODS Parts, XMOD Hop-Ups, XMOD Parts, Bit Char-G Hop-Ups, Bit Char-G Parts, MicroSizers Hop-Ups, MicroSizers Parts

Go Back   TinyRC.com > 1/43 and Smaller > SuperSlicks > SuperSlicks

Reply
 
Thread Tools Display Modes
  #1  
Old 01-31-2004, 11:12 PM
charliebrown's Avatar
charliebrown charliebrown is offline
I really should change my title...
 
Join Date: Apr 2003
Posts: 923
This Can't Possibly Be True!!!!!!

Well, I calculated that since the motor rpm for the stock SuperSlick is 14,000 and the stock gear ratio is 6.28:1, then the wheel rpm (how many times in a minute the wheel would rotate) would come to about 2,230. Next, I multiplied that by 4.7 (the wheel circumference in centimeters), and figured that the car would go at about 10,481 centimeters per minute. I divided 10,481 by 2.5 to get inches per minute, which turned out in 4192.5 inches per min, divided by 12, turned out to be 350 feet per minute. Then, I multipied by 60 to get feet per hour, or 21000 feet per hour, then divided by 5,280 to get approximately 4 miles per hour. Then I decided that if you upped the motor to the 22,000 rpm motor, (seeing how 22,000 is about 57% more faster), then 4 mph would be increased by 57% also, so I multiplied 4 by 1.57...to get 6.28 mph. Then, if you changed the gear ratio to 4.4, then the speed would be increased by 43%, so I multiplied 6.28 by 1.43 to get.....approximately 9 mph....Woah....Now you guys may think that I'm nuts here, but check this out: A ZipZap with the purple NX motor and red gears will go at about 3 mph, but I tested my ZipZap SE with the NX motor and green gears against a stock SuperSlick, and the SuperSlick was nearly twice as fast, so I'm guessing it hit the 4 mph I expected. I'm guessing it will do the same with the 9 mph setup.

Now, 9 miles per hour is a scale 387, for the SuperSlick size, while 3 measely miles an hour is a scale 192. So, for it's size, this thing oughta FLY!

Also, I'm thinking that you could go beyond the current SuperSlick gear ratio. You need to pull the pinion off the motor a little bit, so it would stick out and be parallel to the axle gear. But, you'd need like a 10T or 11T pinion gear to touch the axle gear, like a Mini-Z. Anyone know where to find the 10T or 11T pinion gear?

Chuckster...
Reply With Quote
  #2  
Old 02-05-2004, 08:40 PM
civic freak's Avatar
civic freak civic freak is offline
Tiny RC Guru
 
Join Date: Jun 2003
Location: asheville,NC
Posts: 271
im extremely dumb can you tell me what color the gears and motor is?
Reply With Quote
  #3  
Old 02-06-2004, 07:58 AM
charliebrown's Avatar
charliebrown charliebrown is offline
I really should change my title...
 
Join Date: Apr 2003
Posts: 923
Quote:
Originally posted by civic freak
im extremely dumb can you tell me what color the gears and motor is?
Red gears: 4.4:1 gear ratio
Orange Gears: 5.25:1 gear ratio
Green (stock) gears: 6.28:1 gear ratio

Red motor: 22,000 rpm
Orange motor: 19,000 rpm
Green (stock) motor: 14,000 rpm

Chuckster...
Reply With Quote
  #4  
Old 02-06-2004, 09:40 PM
civic freak's Avatar
civic freak civic freak is offline
Tiny RC Guru
 
Join Date: Jun 2003
Location: asheville,NC
Posts: 271
so yor sayin for nine mph put in red motor red gears ?
Reply With Quote
  #5  
Old 02-07-2004, 09:34 PM
charliebrown's Avatar
charliebrown charliebrown is offline
I really should change my title...
 
Join Date: Apr 2003
Posts: 923
Well, due to the slop in the gears, it will be 15% less....so, with red gears and red motor, it might only hit 7 mph.

Chuckster...
Reply With Quote
  #6  
Old 02-07-2004, 10:38 PM
civic freak's Avatar
civic freak civic freak is offline
Tiny RC Guru
 
Join Date: Jun 2003
Location: asheville,NC
Posts: 271
Yeh thanx, i thew both reds in there and raced it against my mini-t and i was like "there is no way that thing got anywhere nere 9mph!"LOL
Reply With Quote
  #7  
Old 03-03-2004, 03:53 AM
YeLLoW GT-R R34 YeLLoW GT-R R34 is offline
Registered User
 
Join Date: Oct 2003
Posts: 98
Send a message via AIM to YeLLoW GT-R R34
Wow, just did the calculations. With the new 27k and 3.8:1 motor and gear ratio, this thing would hit about 12.64 MPH...but with the weight and such......about 10.7 MPH! Thats enough to keep up with a stock XMOD!
__________________
XMOD Yellow Skyline
AWD
Wide Track Bearings
IC-3
Soft Front, Monoshock
Hard Treaded
NML Stage 10, blue Gear
Carbon Fiber Driveshaft
Reply With Quote
  #8  
Old 03-03-2004, 01:36 PM
charliebrown's Avatar
charliebrown charliebrown is offline
I really should change my title...
 
Join Date: Apr 2003
Posts: 923
Quote:
Originally posted by YeLLoW GT-R R34
Wow, just did the calculations. With the new 27k and 3.8:1 motor and gear ratio, this thing would hit about 12.64 MPH...but with the weight and such......about 10.7 MPH! Thats enough to keep up with a stock XMOD!
.....Okey dokey....got a pic of the upgrades??

Chuckster...
Reply With Quote
  #9  
Old 03-03-2004, 07:47 PM
YeLLoW GT-R R34 YeLLoW GT-R R34 is offline
Registered User
 
Join Date: Oct 2003
Posts: 98
Send a message via AIM to YeLLoW GT-R R34
Yup, sure do...refer to other thread
__________________
XMOD Yellow Skyline
AWD
Wide Track Bearings
IC-3
Soft Front, Monoshock
Hard Treaded
NML Stage 10, blue Gear
Carbon Fiber Driveshaft
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Is it true... pacificwarriors XMODS 12 11-11-2003 03:09 PM
My true blue pearl sky... unicorn_456 XMODS Gallery 9 11-04-2003 08:03 PM
is this true?? please read and reply tmdz28 Auldey (All) 13 10-17-2003 11:44 PM
True 1:64 scale bit rmyc Bit Char-G Mods and Projects 10 07-22-2003 09:02 AM
true or not true Rcdude7378 Bit Char-G / MicroSizers 9 10-26-2002 02:12 AM


All times are GMT -5. The time now is 03:04 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Mini Inferno Sale - Up to $85 Instant Savings!
Micro-T Hop-Ups
RC18R, M18, Micro RS4, Mini-LST, TamTech-Gear, Minizilla, RC18T, RC18B, RC18MT
shop.tinyrc.com Products
Tiny RC Community News
[03/17/10] Kyosho Mini-Z F1 MF-010 SP2... : The Kyosho Mini-Z F1 MF-010 SP2 Carbon Limited ASF 2.4GHz Tx-Less Chassis Set - more»
[10/23/09] Kyosho Mini-Z MR-03 In Stock! : The Mini-Z MR-03 (http://mr-03.com) is now In Stock and Pre-Orders are shipping! - more»
[09/06/09] Labor Day Savings - $5 Off... : Labor Day traditionally marks the unofficial end of summer - but we're not ready to let go! So, we - more»
Mini-Z, Mini-Z Racer, MR-02, MA-010
M18, M18T, RC18T, Mini-LST, Mini-T, Micro RS4, XRay, 1/18, 18th scale
XMODS, XMOD, Micro Flight, ZipZaps, ZipZaps SE, Bit Char-G, MicroSizers, TTTT, Plantraco Desktop Rover, SuperSlicks, Digi Q
Mini Inferno, Mini Inferno ST, half EIGHT, 1/16, 16th scale
Epoch, Indoor Racer, 1/43, 43rd scale
E-Savage, eSavage, eZilla, e-Zilla, HPI
Robots, Bots, Bipeds, Wheeled, Manoi, Roomba, NXT, Lego, Hacking
Crawling, Crawlers, Micro, RC, Losi Mini-Rock Crawler, Duratrax Cliff Climber
Kyosho Minium, Caliber 120, Minium Forums
Mini-Z Hop-Ups, Mini-Z Parts, Mini Inferno Hop-Ups, Mini Inferno Parts, M18 Hop-Ups, M18 Parts