|
i made my own charger its a 4 AA charger. any help on how to keep the wires from breaking? and i was wondering...... if i left the chargling plates alone on the car and the wires that go from the plate to the pcb can i solder my own wires from the battery to the car? in general it would be like this. i would solder 2 batteries together. next i would solder a wire from the positive side of one battery to the pcb board right next to the other posititive wire that leads to the positive charging plate. same thing with the negative part just swap "positive" with the word "negative". would it still charge functionally and still run at the same speed a bunta vertical 2 cell would or strider 2 cell?
__________________
MICROSIZER PRO:   2 SPEEDS, 1.3 NIMH, 49 MHZ, SKYLINE R34 GTR custom paint, pull back wheels, blue head lights
MICROSIZER SPORT:  1.3 nimh, rest is stock
panther=  2.4 nicd, rest is stock
MEGATOYS rc:   rest is stock
bitchar-g: rest is stock
|