Quote:
Originally posted by sessiz10
If you have some sand paper try sanding the face a bit to rough it up. Not too much now just a few scratches and the solder should stick better.
|
I agree with the above fellow try just to take the shine off it.heast up your iron get it nice and hot.tin your iron( that means to get it hot and then add the solder to it so the iron is covered with solder) Tin your wire (same as above) once both are tinned and your batt is sanded add the iron to the battery and just as the solder is getting shinney/molten add your wire and it should stick fine