Quote:
Originally posted by boogerboy72
i know that much but what do i need to do and what parts do i use and where to solder?
|
u need to buy a bit booster pcb to swap into the zz and a 4 band controller...there is nothing u can modify on the zz pcb to make this change alone, u gotta do the full swap
and use the 4band controller.
you'll have to desolder all the wires, including the tiny steering wires, from the zip zap pcb and resolder all of them back onto the booster pcb.
the boards have labels next to the solder joints in tiny white letters .ie V+ V- L R F B..just make sure you solder the wires to the same functions on the donor board.
it's pretty easy.
you can get an lxx booster as a donor..they are cheaper than the bit and run fairly well.
if u have any problems during the swap, just ask. ive done several...and there's a bunch of others who have done swaps too. it's definitly worth it. especially with a booster pcb.