Quote:
|
It put out 180 mA from a battery puttting out 196mA. That's a pretty good improvement when you consider that both my Bit and Microsizer put out 191mah from batteries that were putting out 199mA. Which is not consistant with the numbers Namuna got, but I'm not sure why he's getting more than the battery was putting out in the first place. If you want numbers you can trust, go pick up a multi-meter and test yourself. I'm interested to hear more input.
|
How are you testing?
When I did my initial test, I took the motor out, then put 1 lead each (from my multimeter) to the pos and neg on the Motor mount on the car and then hit the forward button to get the juice flowing...This should indicate the maximum mA throughput the PCB can put out.
As for testing the battery, well I'll try that as well...But that should be a simple connect to the pos and neg on the battery.