|
Man...I wish i had a digital camera....I did this conversion Wednesday. I used the front and the rear wheels of the pull back. On the front wheels I had to use some spacers I made, because the rim and tire were rubbing on the steering joint. I didn't have my dremel with me so I just used wire cutters to trim the rear axle. I used the original gear that came with the axle to help get the wheel straight by glueing the hub and the rim to the gear. I had to use a spacer on the hub on the non gear side to extend it to have the right side to side balance.
Hopefully I can get my friend to let me borrow his digi cam. this week.
|