Head Lights:
Here's a VERY basic guide. This isn't enough to build it, but this info. is enough to start to grasp it. Either late late tonight or tomorrow ill have a step by step guide.
First, space your 2 LED's apart, about the width of the car. Solder a wire from the left ones negative wire to the right ones negative wire. Then solder the left LEDs positive wire to the right ones positive wire. They are now linked, and practically work as one.
Here's an image.
Now, solder or melt or cut out, the holes where the lights will shine through. Pretty much , cut out where the fake painted head lights are.
Stick our little headlight connection thing's LED's right in front of it. Match them up, apply a little super glue. Now You'll need a switch.
Make a hole in the rear for a switch, then stick the switch in. It should be a 2 pronged switch [
http://www.radioshack.com/product.as...5Fid=275%2D406 ]
--End of part one--