|
TinyRC, I guess a picture is worth a thousand words so, here's a side by side comparision of a stock "Mini Mover" OEM Bullet to the mod.
The body was first lowered by .050". rough cut the top off with a Dremell cutoff wheel and trimed up with an Excto. The back was then formed with a piece of window film taped on and then glassed from the inside.
The front brake holes and side air exit holes were cut out.
The electronics cover was removed because I'm getting ready to add an interior shelf for the driver and the board was taped on with a piece of 1/16" fine line tape.
It was filled in and primered, a white base coat was sprayed and then the yellow pearl added and then the whole thing was clear coated. The picture doesn't do the color justice
|