|
As far as charging batteries goes, you set the V = to what the pack is...so the 2x1.2v in series = 2.4V...You SHOULDN'T mess with this setting.
You can 'play' with the settings as far as how much Current to pump to the batteries (mA). For instance, I put my Multimeter to the Bit Char-G charger and it was cranking out 2.0A...Now THAT'S fast charging!
So, in your case...The 'V' should be set for 2.4V, and the 'I' is up to you (For me, I'd crank 1.5A for 60 to 90 seconds...You can set either the current or time for more or less, depending on how daring you want to be)
Good luck.
|