|
stevensmd3,
It's really not that hard. All you need is a pair of finger nail clippers. 1. Open up the car's chassis and find the Yellow wire 2. Cut the Yellow wire off as close to the circuit board as you can 3. Strip the Yellow covering off of the end exposing about 1 cm of bare wire 4. Remove the battery making sure to note which end is the positive and which is the negative 5. Place the bare end of the yellow wire between the metal positive terminal and the cars chassis 6. replace the battery making sure that the yellow wire is pinched and is making a connection with the metal positive terminal 7. Put everything back together and go blow your friends away.
Kyle
|