[john]

Here's the chassis to the Mustang. I glued some Hotwheels seats and dash to the PCB cover. Actually, I had to cut away a good portion of the cover to get them to fit. And the back seat was glued to body, but I removed it when I started messing up the paint on the Mustang. I messed it up bad. I need a new Mustang body, mine got real ugly after I took solvent (Pine Sol) to it. Live and learn.

If you use Pine Sol to remove the paint, here's a few pointers:
-Don't rush it. Let the solvent do the trick.
-Don't wipe solvent off the car with paper towels. That's very important.
-Dont' touch the body until it is no longer in the solvent and has had several hours to solidify again.

If you do all of the above, you will have an ugly body with fingerprints pressed into it, and with bits of papertowel stuck to it that will never come off. oops.