View Single Post
  #1  
Old 12-26-2006, 01:18 PM
Namuna's Avatar
Namuna Namuna is offline
Hulk smash!
 
Join Date: Jul 2002
Posts: 2,193
Send a message via AIM to Namuna Send a message via Yahoo to Namuna
The Compatible Parts List

Alright folks let's use this thread to track all the compatible parts and pieces we've found that fits the Micro-T. I'll keep this first post updated as new info comes in. Let's start:

Motors
Feigao LPS 5250 brushless motor - 12x22mm 5250kv (Part #1208430S)

Servos
Hitech HS-55 Servo.
Towerpro SG90

ESC
Castle Creations PHX-10 brushless ESC
Castle Creations Mamba 25 Brushless ESC
Novak Spy

Receivers
Spektrum SR3500 Micro

Transmitters
Any 27MHz AM band Tx should work.

Chassis Upgrades
eXo-T Lexan Chassis upgrade: http://www.ripper7racing.com/r7rforu...read.php?t=788
Jrx-Z CF Chassis upgrade: http://www.pro-z.com/jrxz/

E-Clips!...Arrrgh!
- Launched an e-clip into neverland? Try using a staple! LOOK
- Also noted is that the e-clips are the same as the ones used by the Mini-T (Losi Part#LOSB1043. Usually sell for $1.50 in packs of 10!).

Alloy Parts
GPM: http://gpmracing.com.hk/car/page/pop_tm01.asp
Hot Racing: http://www.hot-racing.com/index.cgi?c=234
RC Atomic: http://www.rcatomic.com/main/modules...hp?storyid=226
TheToyz: http://thetoyz.com/cart/thetoyz_cate...0T&action=list

Bodies
Parma: http://www.parmapse.com/Images/aahom...60100_Sell.jpg
BRP: http://brpracing.com/18minit.html

Batteries: Note: Stock batteries are 32.3mm x 20.8mm x 11.7mm
NiMH Batteries:
- Kan 4.8v @ 160maH packs at Cheapbatterypacks.com
http://www.indoorflyer.co.uk/index.a...&productid=186
- GP Batteries: Part:GP16AAAM (1/3AAA size) 1.2v @ 160mah NiMH cells (10.2mm x 14.6mm). Build your own packs (x4)
- GP Batteries: Part:GP11AAAM (1/4AAA size) 1.2v @ 120mah NiMH cells (10.2mm x 10.7mm). Potentially build your own 7.2v 120mah battery.
LiPo Batteries (listed are only Lipos that will fit without any chassis mods):
- Team Losi 7.4v @ 180mah Lipo w/charger Team Losi
- Aero-nuts 180mah 15C Lipo @ Aero-Nuts
- HXT 200mAh 12-20C Lipo @ UnitedHobbies
- Full River 250mah 10c Lipo @ IndoorFlyer (UK Based).
- Micron FP 250mah 12C Lipo (3.7v Cell Part#:m082, 7.4v Pack Part#:m800). This is unconfirmed, but supposedly these batteries will fit the stock battery compartment with only a little finagling. There's also the Micron 230mah 15C Lipo (Part#:m083).

Stock Battery Connectors:
http://www.molex.com/cgi-bin/bv/mol...ucts&Lang=en-US
Part Number: 51006-0200 (Female)
Part Number: 51005-0200 (Male)

Wheels/Tires
Micro RS4 or Xray M18 Rear wheels are a direct slip-on over the wheels/tires of the Micro-T! Check out this picture of a set of RS4 Foams on a Micro-T (not mine):
http://rcbros.com/pop_up_image.asp?s...head/CF7_1.jpg


Misc.
- The suspension springs from an XMods Evo has been reported to work on the Micro-T

...Keep an eye out on this original post as I will be updating it as I find new info and as anyone post info here.

thanks.

Credit
Credit for the information above goes to; crazydave, TheSteve, betty.k and others from bitpimps, yourmicro.com, one18th.com, Ripper7Racing.com, RCGroups and other forums. If I've missed anyone deserving of credit here, please let me know.

Last edited by Namuna; 03-13-2007 at 11:29 PM.
Reply With Quote