|
The SE's pot is a 0 - 10k ohm and the mini-z and xmod pot is a 0 - 5k ohm. So what you can do is get a 10k resistor and bridge the two leads on the pot and I believe it should work. I didn't have any at the time and using a spare pot from a broke xmod I had was my option.
I think the mr02 boards are like $70 last time I looked. Iwaver used to sell pcbs but now it looks like you have to buy a chassis set , iw01 $24.90, iw02 $29.90 plus shipping.
Edit: I just tested 3 pots, stock SE pot reads 4.5 ohms - 9.30k ohms. Xmods pot reads 47 ohms - 4.93k ohms, and the mini-z pot reads 2.5 ohms - 5.18k ohms. So I believe adding the 10k resistor should do the trick.
Last edited by sat274life; 04-25-2005 at 12:25 AM.
|