|
now i'm not positive on this but i figured i'd try and help you b/c noone else has.
mah is a measure of how much current (amps) can be drawn through or from the device. so i'm thinking that the charger would only draw as many mA as it needs as long as the voltage is correct.
Now if it changes the mAh out put of the charger that could be bad. That out put determines how long the bats are going to have to charge. There is a ratio of the mAh rating on the bats to the charging amperage but I can't remember want it is. I hope this helps and that i'm correct.
|