|
well i got some wheels from a "superblox" kit (lego knock off), sprayed them "chromer" and added spacers to the wheels on the ZZ...i then hot glued the new wheels on. it works...well...it moves...the wheels are a little off center, so i got in touch with a guy who modified his char-g and he actually used larger pins for holding the wheels in, and a small spacer between the zz wheel gears (or knuckles on the front) and where the wheel actually started.
i got a second motor in it working too, but i just used tin foil + electrical tape, and it would run (quite well) for like two feet...then the motor would slip out (i had to remove the thing that held the single motor in place to make room for a second motor). so now i need to engineer some kind of bracket to hold both motors in place.
q: i have read with the bit char-gs you have to build your own charger if you do a multi-cell battery mod, is this also the case with the ZZs ? i was thinking about building one anyways because with the new wheels its a little aqward to get the car to fit on the SE charger.
thanks for your help
-e
|