|
Bodies: Will NOT fit with out modification to the body mounts. Not all Mini-z bodies wheel basses are the same. So you may need to stretch or shorten the chassis on a Xmod.
Battery Clips: On the Original Mini-z the clips can fit with minor sanding or fileing. The MR-2 is a new design and not at all compatible.
Motors: Mini-z motors will physically fit in the Xmod but the stock electronics may not be able to handle the faster more powerful motors. Also you will need to invest in a Pinion puller form a hobby shop that sells the 1:24 scale slot cars to remove the brass pinion on the Xmods motor.
Tires: The rubber tires on the Mini-Z can fit but since the Xmods have a raised part in the center of the wheel that will have a raised center when installed.
Wheel Nuts: YES the 2mm Wheel nuts will fit perfectly. The only problem is the stock plastic wrench that came with the Xmods may not fit the nut to tighten it down.
More later as I get more info. Also keep an eye on the Xmods FAQ.
|