Quote:
Originally posted by miketre
Does anyone have the datasheets or know what type of FETs they are?
I had assumed that the ESC is using a H bridge and to stack it, I just need 1 N channel and 1 P channel MOSFET.
|
It was N channel MOSFET but the type is quite blur. It written V30010. You could use IRFZ44N to replace stock FETs. If you want a higher output you could put IRFZ40 to replace them. See my scheme, the one on the top is Mini X scheme of motor control and the one below is standart configuration of motor control using N channel FETs.
Quote:
Originally posted by miketre
Since I have quite a few mini-z size FETs lying around, i decided to give it a try with them (see pic). The connections were wired to the legs according to the layout of the tiny FETs (grey=gate, white=source, red/black=drain).
|
Mini Z FETs (7389 or 4562) is mixed of N channel and P channel. This should be more complicated than using the IRF above. See my thread:
http://tinyrc.com/forums/showthread....threadid=14028