motor works batt.
 

i have a motor works car and it sucks so i took the batt. out of it and put it in my bit and i get alot longer run times and more speed and tourqe. the batt is a 1.2V 110 mah and it NAMH i dont know if the larger NAMH like the 150 are better but this one has worked out great for my use. i want to know if anyone know's a way i can use the motor works charger? i cant seem to get my bit to charge on it.bc12m :btm: b30 bbskyw

the motorworks may be reversed. my nkok boat charger is reversed from the bits.

the higher the mAh, the more capacity it has. How many volts(V) it runs, the quicker the electricity "flows". so a 10V batteries would blow a bit, but a 1V wouldn't. NiHM is better than NiCd, which comes with the bit. bit comes with a 50 mAh NiCd (im not sure of the V, I dont own a bit.), and the motor works comes with a 1.2V 120 mAh NiHM Some one correct me if I am wrong, but that is what I have heard.

nimh and nicd isnt much difference. they are all cheap batteries.

all are rated at 1.2v some may give more like 1.25 or 1.3 when fully charged and some have higher capacity than others. the capacity is what everyone is looking for.


again the most important thing about these batteries is:

they are cheap and replacable. they are not being used to power the space station or a jet fighter so if one dies eventually it is not the end of the world. you choke it up and spend a few bucks on another.

ya the motor works are NIMH but the arent 120mah the one i have is 110,i dont have a way to get a hold of a higher batt like mabe a NIMH 150 but if anyone will send me one or two ill pay.