TinyRC.com

TinyRC.com (http://tinyrc.com/forums/index.php)
-   Bit Char-G / MicroSizers (http://tinyrc.com/forums/forumdisplay.php?f=10)
-   -   Auto Charger (http://tinyrc.com/forums/showthread.php?t=5169)

Bryan4691 12-18-2002 08:13 AM

Auto Charger
 
I am not for sure if anyone has tried this but I just built a prototype auto charger. What I mean by auto charger is that I can drive my car over the charger and it charges. This was accomplished by adding 2 flexible wires from the bottom of the car so that when it is drove over the charger it makes contact. I use some thin metal strips for the charging rails and wired that to a 3-AAA battery holder. I will be adding this feature to my track so that when I am running low on juice I can just go into the pit and auto charge with out touching my car. I will post some pics for everyone to see how this was accomplished. Please note that this is a prototype so the look of it is not very pretty.

Bryan4691 12-18-2002 08:21 AM

Pic
 
1 Attachment(s)
Here is the bottom of the car.

Bryan4691 12-18-2002 08:22 AM

1 Attachment(s)
Here is the auto charger prototype.

bill 12-18-2002 08:42 AM

Sounds like a good idea but you'd have to put some guide rails so that you drive right into the charging area.

Bryan4691 12-18-2002 08:45 AM

That is the plan. In the charger pic you can see that I have stacked up some Lexan so that the tires will be guided onto the charger. The track version will have a wall that will help guide the car + the charging strips will be much longer so that you will not have to stop on a dime when trying to charge.

scottyboyfun 12-18-2002 08:48 AM

1 Attachment(s)
What a brill idea! imm not sure about the trailing wires under the car cos of poss short circuits against metal,
but as u say, its a prototype.

But this is a brilliant idea!

Never having 2 get out of the chair!

Heres some pics of a car charger i have 4 another car-
When u place the ccar on it,the platform goes down and the car sits on the charging plates.
If u made something like this and put ramps on it u could drive on and off!

scottyboyfun 12-18-2002 08:50 AM

1 Attachment(s)
pushed down

Bryan4691 12-18-2002 08:51 AM

scottyboyfun, I am looking for many suggestions from everyone. As for the metal contacts on the bottom of the car...They do not touch the ground when the car is being driven. But I do understand that a better idea is in need. Thanks for the tip.

scottyboyfun 12-18-2002 08:52 AM

1 Attachment(s)
with car on, the wheels press the platform down.

scottyboyfun 12-18-2002 08:58 AM

I didn't c ur pic earlier,that idea isnt too bad! i can c that the strips wouldn't easily short!

You haven't got 2 much work to do I reckon!

scottyboyfun 12-18-2002 09:02 AM

1 Attachment(s)
with car on, the wheels press the platform down.

swe_modder 12-18-2002 09:06 AM

Good idea, but change the wire thing.. put it on the charger insted and put some long kontakt under the car so you wont get shortcut.. i dont know if you got me.....

One thing about it, i only think it will get some sec of charging... you will have to drive in to the "pit" all the time, right??

Bryan4691 12-18-2002 09:15 AM

This isn't just drive over and go. You would have to stop on the charging strips to get a full charge. The purpose of this is that one would not have to touch the car during a race. The down side of this is that every car would have to be modified to get this to work. If I am the only one with this mod then I would have the advantage.

1llusI0n 12-18-2002 11:01 AM

Looks realy cool keep us updated


All times are GMT -5. The time now is 07:01 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.