TinyRC.com

TinyRC.com (http://tinyrc.com/forums/index.php)
-   Bit Char-G / MicroSizers (http://tinyrc.com/forums/forumdisplay.php?f=10)
-   -   Broke bit (http://tinyrc.com/forums/showthread.php?t=4094)

bitboy 11-30-2002 01:33 PM

Broke bit
 
my lancer bblany w/ crip cap mod is so messed up. if I set the white tab under the car to the center it drifts majorly left and for it to go straight the tab has to be set all the way to the left and either way the left turn works WAY better then the right. Please help!

datamonster 11-30-2002 01:39 PM

carefully disassemble the front end of your bit. check the magnet for any magnetic things that the magnet may have attracted. clean that stuff off and it shoud work better. that's what i did and i dont have to set my trim too far to the left or the right.

mike p 11-30-2002 03:57 PM

hey
 
wheres did u get the thing next to your name?
i want one

bitboy 12-25-2002 12:56 PM

I crapI ruined my bit. The spring that centers the wheel flew off when I removed the wheel cover and I lost it. Then whenputting the cover back over the board 2 wires came off. Now I can't turn left or right. HELp

bitboy 12-25-2002 03:06 PM

I think the sping is call ed the steering spring

Snow 12-25-2002 03:33 PM

Well at www.questformadness.com they have an idea to make a replacement spring. As for the wires, can you solder? If not, maybe somebody from the boards would do it for you if you mailed them your bit.

bitboy 12-26-2002 12:00 PM

nope my dad doesn't have a solderer..... any1 wanna do it


All times are GMT -5. The time now is 11:36 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.