Turbo??
 

Do you have to remove the old fet's when you install the turbo?????

hello
 

were you get the turbo? how much? were? plzz write back

I picked it up here in nyc from Alan Mok (Alan is the Mini-Z MR-01 Stock, & the Mini-Z MR-02 Kyosho Mini-Z National Champion).
He has a store here. I picked a few up from him for 25 bucks.
I here www.rcmart.com & www.hobbyect.com have them for much cheaper :D

I'm sorry, I forgot to tell you that you do not have to remove your stock fet's to use these external turbos!

ok
 

thankz but i went to the sites u gave me but i cant find the turbo can u send the exact link that takes me right to the turbo part

Sure thing!
http://www.hobbyetc.com/cgi-bin/item.cgi?part_id=7657

I know that it will allow you to use bigger motors such as the Impala (it's what I name my modified motor). What I didn't test is how much voltages it will take. So I cannot recommend you use any more than the 8.4v limit(that the max I know the board could take).:confused: :confused:

k
 

thankz but 2 question is it hard to install? if so can u tell me how and sum pics of ur car wit the turbo in ? thankz

and this turbo thing does it work on a Xmod??

I will show pics as soon as I charge my camera. Yes it does work with xmods. Alot of people do not use them beacuse they take up room (for 5 & 6 cell cars), plus they add on a little more weight. The install time is pretty quick (5 mins) you can have it set up so that you can run stock or modified races (just take it out when you want to run in stock races with out any down time)

k
 

ok thankz so send sum pics wen ur camrea is charged

You sure it works?
Most Mini Z turbos are for the MR01 which dosn't support braking.

just stack the fets you wont have all that wire and they cost 3.00 each

Re: k
 

here go that pic I promised.

nice
 

who fast does ur Xmod go?

Where do you hook up the leads of the turbo onto the xmod?
Same way as Mini Z?