motors (bit charge-zz-etc.)
 

Alright, here's a question that I've been waiting to ask. Can the bit-charge motors (this one http://www.tinyrc.com/shop/product.php?pid=581) fit and work on a zip-zaps chassis?

thanks alot:D ,
chris

Yes. That is a Perfection motor. Perfection is the company's name. You can find a perfection 4.2 pro at "toyeast.com". It's cheaper there too, but they are heavey on the shipping charge because it's coming from Hong Kong. use a 3.8 in a ZZ and it works just fine. Perfection also makes a 4.2 king, but it's not as good.

yes, bit motors (like the 3.8 in your link) fit in a zip zap. The motors are about a mm shorter than zip zap motors, so you can't as easily use zip zap motors in a bit char-g/microsizer.

so u cant buy zipzaps upgardes and put them on tomica super bit char-g rc cars then

Gears work, bodys DON'T work, and motors can work, if you want a broken rear body clip or if you want to file down on the inside of the motor bay a little to make room for the longer motor.

cool so i can buy so zipzap upgrades and put them on my bit char-g skyline cool bcause it goes kinda slow so i will get an upgrade and new tres because it goes slower

so zipzap parts (motor and axel/gears) work with MicroSizers and Char-Gs? Dang, im just going to go buy ZZ upgrades then, so much better.

motors don't immediatly fit, though, you need to file down in the engine bay or else the motor will stretch the chassis to the rear clip splits in two.