TinyRC.com

TinyRC.com (http://tinyrc.com/forums/index.php)
-   XMODS (http://tinyrc.com/forums/forumdisplay.php?f=124)
-   -   XMOD bodys (http://tinyrc.com/forums/showthread.php?t=13893)

SerialKillinSam 10-20-2003 01:24 PM

XMOD bodys
 
are the xmod bodys interchangable? or do they only fit to the car the came with. is the car body size diffrent or is every thing built from the same main car but adjustible for the diffrent bodys?

viperkilla 10-20-2003 03:51 PM

Ummm....I am not positive with this answer but I am assuming that the bodies are interchangable.

Micro S2000 10-20-2003 03:53 PM

on the front tab, all the chassies are different. the body only fits a certain one. also i heard that the rsx is a bit shorter than the supra and skyline

XMODADDICT 10-20-2003 03:58 PM

its possible the civic and rsx are inter changeable and the supra and skyline are interchangeable but thats about it

Micro S2000 10-20-2003 04:02 PM

i have the skyline and my brother has the supra. inorder to swap the bodies you would have to swap tabs. the supra tab is much wider than the skyline tab

XMODADDICT 10-20-2003 04:04 PM

OH AIGHT... i dint know, im not rich enough to buy more than one right now

slugbugg 10-20-2003 04:36 PM

Actually if you look very close to the tab on the bottom it will say what car it belongs to.

My supra uses the farthest wheelbase hole and my RSX uses the middle wheelbase hole.

atomikplayboy 10-20-2003 06:08 PM

I see why they did it BUT that sucks... Seems like it'll make it difficult for them to make additional bodys for these things.

AP

Micro S2000 10-20-2003 06:13 PM

no it should be real easy, every car would just come with a tab. but it might be harder to get shorter bodys on longer cars

Bad Company 10-20-2003 06:24 PM

You would have to remove the front springs to change out the front tab. If you are swapping different wheelbase bodies, then you will have to change the wheelbase on the chassis, which is a matter of loosening the two screws on the bottom. I have yet to try this, but I'm thinking you may have to swap out the driveshafts too?

SerialKillinSam 10-20-2003 06:33 PM

yeah i tried this the drive shaft is a diffrent length for each setting so u would have to change it for a diffrent body


All times are GMT -5. The time now is 07:28 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.