where u people get tese things?
 

I'd like to buy these things, but where can I buy it?
Is TyniRC have some?
Bank payment?

This one is quite match to my need. Is it has a ball at the end? Was it called turn-buckle? TinyRC, u have some? Hehehee...
I badly need it.

those are costum made from parts from local hobby store

itan is right. i found those in the glider and airplane section of my hobby shop. the 1/10 scale ones are too big and heavy

i found it at my Z.
 

Thank you for Itan and Takumi.
I found that thing at my Z. It was a part of Z's damper (see my pic). It costs 10 bucks to get the whole set of the damper but what I need was only the black plastic section, the rod and it's ball. None any LHS at my country sell that things.
Can I know the name of that part and the price at your LHS? I will need some.
Thank you.

TinyRC, u did not read my request, didn't u?:mad:

Try looking in the helicopter section of your LHS. Helicopter swashplate links are usually smaller (especially parts for the small electric helis like the Hornet, Piccolo, and Hummingbird) than the off-the-shelf ball links.

Hi Mic, nice to see your post again.
Thank you for all reply, but NONE of LHS here sold that parts, especially the airplane things.
Hiks....

Tinyrc, (((halloooo)))

HeliHobby.com

See if part numbers L1-11892 & L1-16575 will work for you. About $5 for the set of 4 but they may have to have the center hole drilled out bigger.

Cool, Mic.
Thank you verymuch.

helldriver, email us at shop@tinyrc.com and we will try to get these for you! :)

This why I need the linkage badly. I found another linkage that should be work on my project. It's from my Duratraxx GP 1/10 steering rod but STILL none lhs here sell that things! Sigh.
YES. I'd lke to build 2 motors AWD monster, that I will call it OL Killer. Hahaa...
I use the shocks from original OL shock set but i didn't install it properly yet. I just double-taped it for this photo session. Hehehe....

another angle
(it may blurer, sorry)

I decided to put 2 motors since I could not make a joint-coupling like the pic attached (white circle). Any body knows how to make it? If I could make it, I will use single 180 high torque motor.
Wait for the next project will be on All Wheel Steering 4WD Monster OL Killer.
Well....somebody will help for the joint-coupling (or whatever its name)??
Thank you.