TinyRC.com

TinyRC.com (http://tinyrc.com/forums/index.php)
-   Kawada Tripmate Parts and Hop-Ups (http://tinyrc.com/forums/forumdisplay.php?f=34)
-   -   smallest electronics... (http://tinyrc.com/forums/showthread.php?t=12619)

herman 07-30-2003 06:51 AM

smallest electronics...
 
just wondering what's the smallest electronics that you've put in your kawada???

for me...i think the novak spy (esc), hi-tec shredder (rec) and hi-tec 55 (servo) combination's the best...

what's your set up?

Cian 10-01-2003 06:57 AM

All the Rx's I have come across are all pretty similar in size, especially the FM receivers. I'm sure you can get some pretty tiny ESCs, like teh ES-20, and Great planes have some ESC's that don't have a case, just heat shrink wrapped around them. Is the SPY much smaller than the ES-01? I've never seen one, I'm just going on what's on the tower website..

The smallest servo I have seen has to be the Mini X servo, but I'm sure there are more out there. Some of the sailplane servos are tiny !! :D

I'm actually thinking of decasing the Rx and ESc (the CPR kit) I got with the Kawada, and I want to put them in mini Z chassis. I'm gonna use the steering setup from the kawada with a miniz bulkhead, so I have adjustable toe. My rear (kawada) diff nefer worked, and I have been using a miniZ stock diff, with the brass extension piece screwed on the end. (needless to say it's crap..).

I suppose I could just make a custom H-plate for the mini-z Diff, but I dont have the tools. This way I will have the bset of both worlds, if it all works out...


All times are GMT -5. The time now is 11:49 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.