TinyRC.com

TinyRC.com (http://tinyrc.com/forums/index.php)
-   Bit Char-G / MicroSizers (http://tinyrc.com/forums/forumdisplay.php?f=10)
-   -   dual cell woulnt charge (http://tinyrc.com/forums/showthread.php?t=10642)

SlowbutCourious 04-26-2003 10:48 AM

dual cell woulnt charge
 
my internal dual cell was runnin strong untli last nite!.. now it woulnt charge.. i can take the cells out and charg them but that got old after doin 2 times... has this happend 2 anyone else?..what happened:confused: :mad:

bdebde 04-26-2003 01:52 PM

What kind of charger are you using for your dual cell. It will not charge on the stock charger unless you modify it.

SlowbutCourious 04-28-2003 03:49 PM

i added the extra batt. 2 the controler it was chargin and now it woulnt:mad: this is only with my internal dual cell the other 1 charges fine:confused:

hogjowlz 04-28-2003 04:05 PM

either somthing came loose or you have a short.

SlowbutCourious 04-28-2003 04:06 PM

i cant find anything loose ..what kinda short?:confused:

hogjowlz 04-28-2003 04:11 PM

well my 2000gtr hit something hard(headers or something from a mopar) one night and then it started to act real funny. it turns out the solder joint from the motor terminal cut through the battery insulation. i have a vid of the accident ill have to post it soon.

SlowbutCourious 04-28-2003 04:22 PM

!!thanx hogjowlz!! i'll check 4 that..i was crashin into everything that day 2..

SlowbutCourious 04-29-2003 10:32 AM

well thats NoT it..:mad: ..anyother reasons why this car is not chargin:confused: ..i'm ready 2 smash this thing with a hammer:mad:

hogjowlz 04-29-2003 10:44 AM

desolder and resolder
you never know
maybe the board is fried maybe a battery went?

SlowbutCourious 04-29-2003 10:51 AM

thanX AGAIN Hogs i'll replace the pcb and go from there..U must have ESP or something ( someone is havin a problem on tiny rc hogs is pulled 2 the comp.2 offer his expert wisdom )

hogjowlz 04-29-2003 11:11 AM

thats because ive broken a whole lot of em.

SlowbutCourious 04-29-2003 11:39 PM

ok that car is now in bits..:mad: replaced the pcb still nothing resoldered everything but the chips on the pcb..i just ordered2 more clones and am just startin over:D


All times are GMT -5. The time now is 07:33 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.