TinyRC.com

TinyRC.com (http://tinyrc.com/forums/index.php)
-   Bit Char-G / MicroSizers (http://tinyrc.com/forums/forumdisplay.php?f=10)
-   -   Steering Problems (http://tinyrc.com/forums/showthread.php?t=10314)

AznFobbert 04-13-2003 06:43 PM

Steering Problems
 
1 Attachment(s)
I recently purchased an AutoModellista bcg set. With a r-spec motor, my car drifts to the right. Any ideas to correct this? I have tried adjusting the trim, but it is not enough to counter the torque.

Zephyranthes 04-13-2003 06:44 PM

Double spring or bend the spring. Check any hairs in the wheels.

AznFobbert 04-13-2003 07:07 PM

What exactly do you mean by doubling or bending the spring? I have already cleared out all fibers from the front wheels.

revenant 04-13-2003 09:35 PM

Yeah, I have the same trouble. All of my cars pull a little either left or right. I am having a heck of a time getting them to go completely straight. How do you do the double spring thing?? What other tricks can I try?? *help* :)

nrmcj 04-14-2003 12:18 AM

well, usually cars will never go PERFECTLY straight... just cuz there's a lot of play involved in the steering mechanisms...

double steering springs WILL help, but will increase ur turning radius signigicantly... i've just learned to live with a slight curve in my bit's running...

SlowbutCourious 04-14-2003 03:05 PM

...have u tried takin the steerin bar out,and movin the adjust.bar all the way 2 one side,put the steerin arm back, and then tryin 2 adjust from there...

hogjowlz 04-14-2003 03:24 PM

look at your rear axle. do either of the wheels spin freely on the axle? if so theres your answer.

AznFobbert 04-14-2003 03:25 PM

Yeah, my wheels spin freely... oh well, I'll just live with the curve..

hogjowlz 04-14-2003 03:30 PM

go buy jbweld. a few drops on the axle will hold it solid. you will thank me.


jbweld can be purchased at homedepot or any hardware store for 3 or 4 bucks.

superglue might work in the meantime.

revenant 04-14-2003 03:32 PM

Well, I guess that is to be expected. It's not like they're highly calibrated and precision tuned machines. ;) I have been taking little super fine hair-like strands of copper wire and looping them though the steering arm bracket to take up the extra room, thus, tightening it up a little. It seems to be working. It does not restrict the movement at all, but just makes the "slop" movement less noticable.

AznFobbert 04-14-2003 04:32 PM

My char-g also turns right a lot sharper than left? Any ways to correct this? How did yall get those icon things at the bottom of ur posts? I'm new to this forum thing...

revenant 04-14-2003 05:52 PM

Quote:

Originally posted by AznFobbert
My char-g also turns right a lot sharper than left? Any ways to correct this? How did yall get those icon things at the bottom of ur posts? I'm new to this forum thing...
After about 20 or so posts, you go to your user-cp and use the "change avatar" option to put a picture there. It'll only let you do that after a certain amount of posts (I think 20), though.

AznFobbert 04-14-2003 06:39 PM

1 Attachment(s)
Do you mean like those lil pics that have like r-spec or something on it like this?

revenant 04-14-2003 06:42 PM

Oh, I guess that could have been it. In which case, it's in the "smilies" list on the left :)
b24awgm b2spd :bgdr: :bir: b38 bblany

AznFobbert 04-14-2003 07:19 PM

Thanks :D

bc12m b2spd bg986 brspec bbgtr :bdrop:


All times are GMT -5. The time now is 03:15 PM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.