Mini GP Dissection [Archive]

tinyrc

07-31-2002, 12:34 AM

We took a Mini GP apart to see what's inside:

http://tinyrc.com/gallery/minigp

It was actually really easy to take apart and put back together!

Namuna

09-09-2002, 08:10 PM

Hmmmm, think a 3.8motor could be modded to fit???!! :eek:

tinyrc

09-11-2002, 05:36 PM

Certainly, it should be pretty easy - driving it with a 3.8 however would be a real challenge!!!

JDMstuff

10-29-2002, 04:54 AM

Soldering will be necessary, and you need to make sure that you use a soldering iron that is rated for no more than 15 watts. You'll have to ground the negative wire to the can of the motor, since BitChar-G motors only have one terminal. Other than that, it fits fine. I just put in a 2.6 in mine, and it drives fine.

SiK_pNoi_sTyLez

10-30-2002, 08:40 PM

Where can i get a bit char-g motorcycle?

Fastandfurious

12-25-2002, 10:47 PM

HELP!!!

all right i have 1 now but how do i take it apart?

no skrews... what the hell!

Hey administrator...i saw the disection pics but how do you get the 2 halfs of the bike off!

any help would be appreciated

THANKS

tinyrc

12-26-2002, 01:30 PM

There are screws, they are just a little hidden - recessed inside the body.

PWalk

02-05-2003, 07:33 PM

How about throwing an R-Spec in there? I'm going to try it. What the heck.

mitchell

10-08-2003, 02:50 PM

my bike is making alot of noise it seems like the wheel is hitting the gear that drives the gear next to the weel any ideas?