Please Help!!

[Neon_Skylineboy]

Im really pissed, i just took apart the front end of my car, and put new springs in... but when i put it back together it makes an extremly wide left turn:( i was wondering if there is a way to fix this, thanks for the help:confused:

[tinyrc]

Neon_Skylineboy, check the magnet - make sure it is dead center, not off to one side. If that's not it, let us know and we'll continue to diagnose it.

[Neon_Skylineboy]

man... it is dead center, this sucks:(

[tinyrc]

And tweaking the steering adjustment underneath doesn't help at all?

[Neon_Skylineboy]

no...:(

[Neon_Skylineboy]

no more help!?:confused: :confused: DUDE!!!! HELP ME!!!!!

[Diego]

Check the return spring on top of the steering plate. Mine got a little bent and my steering waqs completly mees up. I didn't paid attention to that little bent in the spring at first, but since I bend it back my car runs like new

[Neon_Skylineboy]

thanks, but it looks normal....:(

[tinyrc]

Are both of the front wheels spinning freely? Check for hairs, dirt, etc. Are both tires on perfect?

[Neon_Skylineboy]

it moves normally, but when i turn left WHILE in moving it barly turns, but when i pick it up it turns normally, what the hell!??!:(

[tinyrc]

And you've made sure that everything is clean and straight? Is the body on straight, maybe the wheel is rubbing the well?

[butler]

Does the car appear to turn the wheels the same left and right when you lift it off the floor?

[Neon_Skylineboy]

Tiny RC, YES! it is clean! Butler, yes same thing...:(

[butler]

Take the springs out then. If that doesn't fix it, they must be an internal problem of unknown origin. Sorry thats not very helpful.:(

If it does fix it then I have a set that I am waiting to fit so I will see how it goes.

Are the springs in tight, or did you cut them down?

[xatu]

That EXACT same thing happened to me when I accidentally dropped it, I think , lol, 10 times? Yea, I just blew in it alot, and used canned air, and kinda dropped it 1 foot, and it works fine now! :D

[Blue Bit]

i tried bending the front axles a little bit (toe in) but this can break it if done forcefully in this link :

http://www.asahi-net.or.jp/~VS6N-MRYM/tubuyaki/bit/bit3.html

it's in japanese but you will see the picture at the bottom (the last two pictures) where he has a screw driver in the axle mount. You can slightly bend it.

for examle: your car dose wide left turns, giving the front right wheel some toe-in will help tighten the left turn. Be extra carefull though be cause it can ruin your steering if done many times in the wrong way.

hope that helps