The Compatible Parts List

[Namuna]

Alright folks let's use this thread to track all the compatible parts and pieces we've found that fits the Micro-T. I'll keep this first post updated as new info comes in. Let's start:

Motors
Feigao LPS 5250 brushless motor - 12x22mm 5250kv (Part #1208430S)

Servos
Hitech HS-55 Servo.
Towerpro SG90

ESC
Castle Creations PHX-10 brushless ESC
Castle Creations Mamba 25 Brushless ESC
Novak Spy

Receivers
Spektrum SR3500 Micro

Transmitters
Any 27MHz AM band Tx should work.

Chassis Upgrades
eXo-T Lexan Chassis upgrade: http://www.ripper7racing.com/r7rforums/showthread.php?t=788
Jrx-Z CF Chassis upgrade: http://www.pro-z.com/jrxz/

E-Clips!...Arrrgh!
- Launched an e-clip into neverland? Try using a staple! LOOK (http://forums.radiocontrolzone.com/showpost.php?p=2154844&postcount=553)
- Also noted is that the e-clips are the same as the ones used by the Mini-T (Losi Part#LOSB1043. Usually sell for $1.50 in packs of 10!).

Alloy Parts
GPM: http://gpmracing.com.hk/car/page/pop_tm01.asp
Hot Racing: http://www.hot-racing.com/index.cgi?c=234
RC Atomic: http://www.rcatomic.com/main/modules/news/article.php?storyid=226
TheToyz: http://thetoyz.com/cart/thetoyz_categories.lasso?cat_id=710&cat_name=MICRO%20T&action=list

Bodies
Parma: http://www.parmapse.com/Images/aahome%20pics/60100_Sell.jpg
BRP: http://brpracing.com/18minit.html

Batteries: Note: Stock batteries are 32.3mm x 20.8mm x 11.7mm
NiMH Batteries:
- Kan 4.8v @ 160maH packs at Cheapbatterypacks.com (http://www.cheapbatterypacks.com/main.asp?sid=675911&pgid=superlisting&type=car&manufacturer=3&model=419)
http://www.indoorflyer.co.uk/index.asp?function=DISPLAYPRODUCT&productid=186
- GP Batteries: Part:GP16AAAM (1/3AAA size) 1.2v @ 160mah NiMH cells (10.2mm x 14.6mm). Build your own packs (x4)
- GP Batteries: Part:GP11AAAM (1/4AAA size) 1.2v @ 120mah NiMH cells (10.2mm x 10.7mm). Potentially build your own 7.2v 120mah battery.
LiPo Batteries (listed are only Lipos that will fit without any chassis mods):
- Team Losi 7.4v @ 180mah Lipo w/charger Team Losi (http://www.teamlosi.com/Products/Default.aspx?ProdID=LOSB0862)
- Aero-nuts 180mah 15C Lipo @ Aero-Nuts (http://www.aero-nuts.com/product_info.php?products_id=356)
- HXT 200mAh 12-20C Lipo @ UnitedHobbies (https://www.unitedhobbies.com/UNITEDHOBBIES/store/comersus_viewItem.asp?idProduct=4358)
- Full River 250mah 10c Lipo @ IndoorFlyer (http://www.indoorflyer.co.uk/index.asp?function=DISPLAYPRODUCT&productid=186) (UK Based).
- Micron FP 250mah 12C Lipo (3.7v Cell Part#:m082, 7.4v Pack Part#:m800). This is unconfirmed, but supposedly these batteries will fit the stock battery compartment with only a little finagling. There's also the Micron 230mah 15C Lipo (Part#:m083).

Stock Battery Connectors:
http://www.molex.com/cgi-bin/bv/mol...ucts&Lang=en-US
Part Number: 51006-0200 (Female)
Part Number: 51005-0200 (Male)

Wheels/Tires
Micro RS4 or Xray M18 Rear wheels are a direct slip-on over the wheels/tires of the Micro-T! Check out this picture of a set of RS4 Foams on a Micro-T (not mine):
http://rcbros.com/pop_up_image.asp?src=gallery/gasshead/CF7_1.jpg


Misc.
- The suspension springs from an XMods Evo has been reported to work on the Micro-T

...Keep an eye out on this original post as I will be updating it as I find new info and as anyone post info here.

thanks.

Credit
Credit for the information above goes to; crazydave, TheSteve, betty.k and others from bitpimps, yourmicro.com, one18th.com, Ripper7Racing.com, RCGroups and other forums. If I've missed anyone deserving of credit here, please let me know.

[Namuna]

Adding the following items to the list:

Castle Creations PHX-10 brushless ESC
Feigao LPS 5250 brushless motor - 12x22mm 5250kv

And making some changes to the layout of the original post.

[SCARHARDT]

Gold Peak 4.8v 160mah NiMh battery pack $11.49
HERE (http://www.killerhobbies.com/items/batteries/mini-car-batteries/GoldPeak48v160mahNiMhbatterypackfortheMicro-T-KIL0100-detail.htm)

[Namuna]

Higher capacity pack, for slightly less than stock. Nice!

Killer Hobbies is also solid shop. Nice find SCARHARDT. Hope you don't mind I updated your post with more detailed info.

[SCARHARDT]

it is a good find, ive been searching everywhere lol, gf is getting a little peved that im spending too much time on this little machine

and thanks!

[Namuna]

Added a quick tip about using staples in place of lost eclips.
Also added about the Micro-T using the same e-clips as the Mini-T.

[SCARHARDT]

im gonna try and grind down my old set of rubber for slicks, im running on a linoleum floor, so im gonna use some tricks from my slot car days, will post pics asap

[Keono]

I took some destroyed tires from my Micro-T (it's easy to destroy them on a tight thread carpet) and removed all teh rubber. I then put Foam Tape from Home Depot on the tires and now I have foam tires. so, stock tires+fun+ Home Depot=Foam tires for hardwood floors

[Keono]

Gold Peak 4.8v 160mah NiMh battery pack $11.49
HERE (http://www.killerhobbies.com/items/batteries/mini-car-batteries/GoldPeak48v160mahNiMhbatterypackfortheMicro-T-KIL0100-detail.htm)

I'm sorry my friend, you got RIPPED OFF.
http://www.cheapbatterypacks.com/main.asp?sid=675911&pgid=superlisting&type=car&manufacturer=3&model=419
You can get the 160 MaH 4.8V yadda yadda yadda, for roughly 8 bucks on cheap battery packs.com

[Namuna]

I took some destroyed tires from my Micro-T (it's easy to destroy them on a tight thread carpet) and removed all teh rubber. I then put Foam Tape from Home Depot on the tires and now I have foam tires. so, stock tires+fun+ Home Depot=Foam tires for hardwood floors
Sounds great! What's the part/ticket# of that Foam Tape at Home Depot? And/Or do you have pictures?

I'm sorry my friend, you got RIPPED OFF.
http://www.cheapbatterypacks.com/main.asp?sid=675911&pgid=superlisting&type=car&manufacturer=3&model=419
You can get the 160 MaH 4.8V yadda yadda yadda, for roughly 8 bucks on cheap battery packs.com
Good find on the Kan batts at CBP. CBP also has a good reputation.

Thanks.

[Keono]

hmmm I thought I got it from home depot... It's single adhesive sided foam. I went to home-depot.com and couldn't find it at all... I tried a couple crafts sites as well... I'll keep looking, and if I find it, I'll link it. sry... I bought the stuff a LONG time ago.

[LBRC]

I'm sorry my friend, you got RIPPED OFF.
http://www.cheapbatterypacks.com/main.asp?sid=675911&pgid=superlisting&type=car&manufacturer=3&model=419
You can get the 160 MaH 4.8V yadda yadda yadda, for roughly 8 bucks on cheap battery packs.com

Only problem is that the Cheapbatterypacks.com doesn’t have Micro-T battery connectors, where as the ones from his post do. On the other hand why not get them directly from OnlyBatteryPacks.com instead of resold by Killer hobbies probably with a markup.

[SCARHARDT]

i dont consider that a rip off, especially when it might cost 3 bucks for a connector

[Keono]

sry, I didn't mean to offend. I thought it was a ripoff becuase I auto convert EVERYTHING to deans/micro deans clips right off the bat, and I'm pretty sure CBP does micro deans. as for the foam, I found some in walmart. it's not a tape, it's a sheet. thin, but cheap. $0.89 per sheet. one side is adhesive. I don't know where I got that other stuff. I can't find it anywhere, and I'm all out of it...

I thought of something to make some big foamies for the micro T as well. I'm gonna do it myself as soon as I wear out another set of tires.

http://www.rchobbiesandmore.com/product.php?productid=16940&cat=0&page=4

Cut these into the right width.

glue/double sided tape the tire, and voila, you got foamies.

[Namuna]

Just added "Wheels/Tires" info, the RS4/M18 Rear wheels are a direct slip-on! Sweet!

[Namuna]

Added Micron FP 250mah 12C Lipo (3.7v Cell Part#:m082, 7.4v Pack Part#:m800).

[Namuna]

Added indoorflyer as resource for lipos, and OEM info for the stock battery connectors.

[xboxd83]

can you post the link where you found the Micron FP 250mah 12C Lipo and i probly do but just wondering do i have to have a spectrum radio to use the spectrum micro and can people please also post the price of the Compatible Parts they find and where they found them thankyou

[Namuna]

Added some more info for batteries, bodies and alloy parts.

xbox83,
Do a google search for "micron fp 250" you should be able to find some sources. Yes, you'd need a spektrum tx for the spektrum micro rx.

[xboxd83]

wich one will fit in the micro from here
http://www.rchover.com/batteries
and iv bin looking at these http://www.horizonhobby.com/Search/Default.aspx?SearchTerm=lipo&CatId= and i dont know wich one will fit

[xboxd83]

and wich one would you guys choose

Castle Creations PHX-10 brushless ESC
Castle Creations Mamba 25 Brushless ESC
Novak Spy

[Namuna]

wich one will fit in the micro from here
http://www.rchover.com/batteries
and iv bin looking at these http://www.horizonhobby.com/Search/D...rm=lipo&CatId= and i dont know wich one will fit Any of the Lipos on the rchover page should work, this is unconfirmed. I'd suggest going with the Full River 250mah instead as there's been several confirmation that they will fit without any modifications in the stock chassis.

and wich one would you guys choose

Castle Creations PHX-10 brushless ESC
Castle Creations Mamba 25 Brushless ESC
Novak Spy
Edit/Delete Message You need to keep something in mind (if you don't already know)...The stock electronics handles 3 things:
1. The Servo is a 5 wire setup and the electronics fully controls it
2. The Rx is integrated in the electronics
3. The ESC is integrated in the electronics.
What that all means is that once you take that all-in-one electronics box out of the micro-t, then you've got to swap in ALL the components that it was functioning as before. In other words, if you're thinking about using a Mamba ESC instead...Then you'll also need to be thinking about what other Rx and Servo you'll be using as well.

[xboxd83]

yes I am familiar with rc electronics just not 1/36 scale cars and I know that once I swap out the stock all in one board in the micro I will need new servo and receiver the car is getting completely redone new esc new servo ceramic BB cf chassis im even buying a new spectrum TX just so I can use the spectrum micro and so on and so on I was just wondering which of those esc's was considered the best or has had a good review by rc action or xrc and which one off the rchover site is the fullriver lipo pack

[Namuna]

Good, then you're all set.

The popular opinion is that the Mamba ESC is great. It's a bit big though and folks are resoldering the wires to fit better.

Look at my original post again, there's a link to Indoorflyer for the Full River lipos...I don't know who the OEM is for the Micron packs.

[xboxd83]

“Look at my original post again, there's a link to Indoorflyer for the Full River lipos...I don't know who the OEM is for the Micron packs.”

Please further explain and im still not sure what you mean by fullriver and you said the mamba is the popular choice but which the mamba25 or the PHX-10 and just a little FYI today I found out that a little piece of velcrow on each side of the chassis can completely eliminate the need for small A$$ body clips

[fish2find]

I use the following for my Micro T...

GWS R4P II PICO Receiver

[TheGnarlsburg]

10300kv Brushless Motor for $7.95

http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=9068

Brushless ESC w/ Reverse $19.99 (Have to take it out of it's hard case and re-shrink wrap it, may fit on a Micro-DT chassis and body with no modification(?))

http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=7189